Ford 2007 Expedition v.2 Manuel d'utilisateur télécharger pdf (Page 91)

100

101

6. Install the bulb socket into the lamp assembly and rotate clockwise.

7. Carefully install the tail lamp assembly on the vehicle by securing the

lamp assembly with two torx screws.

High-mount brakelamp

To change the high-mount

brakelamp bulbs:

1. Remove the two screws holding

the lamp assembly in place.

2. Pull the lamp assembly straight

out.

3. Disconnect the wire harness.

4. Depress the four tabs that hold

the light assembly on, one at a time,

and pull the black bulb carrier away

from the lamp.

5. Pull the old bulb out and replace

with the new bulb.

6. Snap the black bulb carrier into

the lamp assembly.

7. Connect the wire harness.

8. Install the lamp assembly with

two screws.

Replacing foglamp bulbs

1. From underneath the vehicle,

rotate the harness/bulb assembly

counterclockwise, to remove from

the fog lamp assembly.

2. Carefully disconnect the bulb

from the harness assembly via the

two snap clips.

Install the new bulb in reverse

order.

2007 Expedition (exd)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 375 376

Commentaires sur ces manuels

Pas de commentaire

Ford 2007 Expedition v.2 Manuel d'utilisateur Page 91

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2007 Expedition v.2