Ford 2007 Escape Hybrid Manuel d'utilisateur télécharger pdf (Page 118)

If a problem occurs with the SecuriLock娂 system, the indicator will flash

rapidly or glow steadily when the ignition is in the 3 (RUN) position. If

this occurs, the vehicle should be taken to an authorized dealer for

service.

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,

you will need to have your vehicle towed to an authorized dealer. The

key codes need to be erased from your vehicle and new coded keys will

need to be programmed.

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

You can program your own coded keys to your vehicle.

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use SecuriLock娂 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

Please read and understand the

entire procedure before you begin.

1. Insert the first previously

programmed coded key into the

ignition.

2. Turn the ignition from the 1

(LOCK) position to the 3 (RUN)

position. Keep the ignition in the 3

(RUN) position for at least three

seconds, but no more than 10

seconds.

3. Turn the ignition to the 1 (LOCK) position and remove the first coded

key from the ignition.

2007 Escape Hybrid (ehv)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

118

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 335 336

Pas de commentaire

Ford 2007 Escape Hybrid Manuel d'utilisateur Page 118