Ford 2007 Escape Hybrid Manuel d'utilisateur télécharger pdf (Page 294)

The brake warning lamp will:

• flash as stored hydraulic pressure is released.

• remain illuminated once the pressure is completely released.

• flash if the brake is applied.

To exit the Pad Service Mode:

1. Apply the brake pedal and turn the ignition OFF then ON. This will

cause brake pressure to be developed within the brake system. Once

brake pressure is developed, the brake warning light will turn off.

2. The Pad Service Mode will also be exited if the gear shift lever is

moved from the (P) Park position, the vehicle is moved (wheels rotate)

or the ignition is turned OFF.

Note: The brake system on this vehicle can only be bled at a authorized

dealer.

TRANSMISSION FLUID

Checking electronically controlled continuously variable

transmission (eCVT)

Refer to your scheduled maintenance information chapter for

scheduled intervals for fluid checks and changes. Your transaxle does not

consume fluid. It is designed to be filled for life. However, the fluid level

should be checked if you notice some sign of fluid leakage.

Automatic transmission fluid expands when warmed. To obtain an

accurate fluid check, drive the vehicle until it is warmed up

(approximately 20 miles [30 km]). If your vehicle has been

operated for an extended period at high speeds, in city traffic

during hot weather or pulling a trailer, the vehicle should be

turned off for about 30 minutes to allow fluid to cool before

checking.

1. Drive the vehicle 20 miles (30 km) or until it reaches normal operating

temperature.

2. Park the vehicle on a level surface and engage the parking brake.

2007 Escape Hybrid (ehv)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

294

1 2 ... 289 290 291 292 293 294 295 296 297 298 299 ... 335 336

Pas de commentaire

Ford 2007 Escape Hybrid Manuel d'utilisateur Page 294