Ford 2007 Escape Hybrid Manuel d'utilisateur télécharger pdf (Page 250)

If the engine still does not start after the first complete high voltage

jump start, a second jump start procedure can be attempted after a

two-minute period (indicated by the button light changing from a rapid

flash to no illumination). This jump start procedure can only be done

twice before the low voltage (underhood) battery becomes discharged

and must also be jump started.

If the jump start button is pressed, but the indicator on the button

flashes slowly, the low voltage (underhood) battery may not have enough

energy to charge the high voltage battery. If this occurs, refer to the

Jump starting your vehicle (Low voltage [underhood] battery only)

section in this chapter for information on jump starting the low voltage

(underhood) battery. You may perform another high voltage battery jump

start by pressing the jump start button after having connected the

jumper cables and starting the booster vehicle.

Once the engine is started, the jumper cables should be removed as

described in the Jump starting your vehicle (Low voltage

[underhood] battery only) section.

2007 Escape Hybrid (ehv)

Owners Guide (post-2002-fmt)

USA (fus)

Roadside Emergencies

250

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 335 336

Pas de commentaire

Ford 2007 Escape Hybrid Manuel d'utilisateur Page 250