Ford 2005 Thunderbird v.2 Manuel d'utilisateur télécharger pdf (Page 188)

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

tightly until clicks are heard, or until it is snug.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level indicator and/or the engine oil filler cap removed.

Engine oil and filter recommendations

Look for this certification

trademark.

Use SAE 5W-20 engine oil.

Only use oils “Certified For Gasoline Engines” by the American

Petroleum Institute (API). An oil with this trademark symbol conforms

to the current engine and emission system protection standards and fuel

economy requirements of the International Lubricant Standardization and

Approval Committee (ILSAC), comprised of U.S. and Japanese

automobile manufacturers.

To protect your engine’s warranty use Motorcraft SAE 5W-20 or an

equivalent 5W-20 oil meeting Ford specification WSS-M2C930-A. SAE

5W-20 oil provides optimum fuel economy and durability

performance meeting all requirements for your vehicle’s engine.

Do not use supplemental engine oil additives, cleaners or other engine

treatments. They are unnecessary and could lead to engine damage that

is not covered by Ford warranty.

Change your engine oil according to the appropriate schedule listed in

the scheduled maintenance information.

2005 Thunderbird (tbr)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

188

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 231 232

Pas de commentaire

Ford 2005 Thunderbird v.2 Manuel d'utilisateur Page 188