Ford 2005 Thunderbird v.2 Manuel d'utilisateur télécharger pdf (Page 142)

ABS warning lamp

The ABS lamp in the instrument

cluster momentarily illuminates

when the ignition is turned on. If

the light does not illuminate during

start up, remains on or flashes, the

ABS may be disabled and may need to be serviced.

Even when the ABS is disabled,

normal braking is still effective. (If

your BRAKE warning lamp

illuminates with the parking brake

released, have your brake system

serviced immediately.)

Using ABS

When hard braking is required, apply continuous force on the brake

pedal; do not pump the brake pedal since this will reduce the

effectiveness of the ABS and will increase your vehicle’s stopping

distance. The ABS will be activated immediately, allowing you to retain

full steering control during hard braking and on slippery surfaces.

However, the ABS does not decrease stopping distance.

Parking brake

To set the parking brake (1), pull

the parking brake handle up as far

as possible. The BRAKE warning

lamp will illuminate and will remain

illuminated until the parking brake

is released.

To release, press and hold the

button (2), pull the handle up

slightly, then push the handle down.

Always set the parking

brake fully and make sure

that the gearshift is securely

latched in P (Park).

ABS

BRAKE

2005 Thunderbird (tbr)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

142

1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 231 232

Pas de commentaire

Ford 2005 Thunderbird v.2 Manuel d'utilisateur Page 142