Ford 2005 Thunderbird v.2 Manuel d'utilisateur télécharger pdf (Page 120)

9. Remove the jack and fully tighten

the lug nuts in the order shown.

Refer to Wheel lug nut torque

specifications later in this chapter

for the proper lug nut torque

specification.

Note: The jack cannot be properly stowed when a full size tire is

placed here. Secure the jack and the temporary spare tire as

shown after the flat tire has been fixed.

10. Put flat tire, jack and lug wrench away. Make sure jack is fastened so

it does not rattle when you drive.

11. Unblock the wheels.

WHEEL LUG NUT TORQUE SPECIFICATIONS

Retighten the lug nuts to the specified torque at 500 miles (800 km)

after any wheel disturbance (tire rotation, changing a flat tire, wheel

removal, etc.).

Bolt size Wheel lug nut torque*

lb.ft. N•m

M12 x 1.5 100 135

* Torque specifications are for nut and bolt threads free of dirt and

rust. Use only Ford recommended replacement fasteners.

When a wheel is installed, always remove any corrosion, dirt or

foreign materials present on the mounting surfaces of the wheel

or the surface of the front disc brake hub and rotor that contacts the

wheel. Installing wheels without correct metal-to-metal contact at the

wheel mounting surfaces can cause the wheel nuts to loosen and the

wheel to come off while the vehicle is in motion, resulting in loss of

control.

2005 Thunderbird (tbr)

Owners Guide (post-2002-fmt)

USA (fus)

Tires, Wheels and Loading

120

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 231 232

Pas de commentaire

Ford 2005 Thunderbird v.2 Manuel d'utilisateur Page 120