Ford 2005 Taurus v.3 Manuel d'utilisateur télécharger pdf (Page 69)

To install the shade:

1. Fasten the cover into the

mounting brackets (make sure the

cover is right side up).

2. Pull the end of the shade toward

you and hook the sides into the

notches (right side first) in the rear

trim panels.

To reduce the risk of injuries, the fasteners for cargo area cover

must be properly attached to the mounting clips on the rear trim

panels.

Do not place any objects on the cargo area cover. They may

obstruct your vision or strike occupants of the vehicle in the

case of a sudden stop or collision.

The cover may cause injury in a sudden stop or accident if it is

not securely installed.

Rewinding the shade

With extended use, the cargo shade may lose its spring tension. If this

occurs, the shade must be manually rewound. This is a two-person

operation.

1. Remove the shade from the vehicle and extend it with the smooth

grain facing you.

2. Wrap the vinyl around the roller

tube twice. Tuck the edges of the

vinyl inside the end cap with each

wrap.

3. Fold the edges of the vinyl

towards the center, making sure

that the edges clear the end cap

slots. Use tape or a rubber band to

hold the vinyl to the left side of the

tube.

2005 Taurus (tau)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 255 256

Pas de commentaire

Ford 2005 Taurus v.3 Manuel d'utilisateur Page 69