Ford 2005 Taurus v.3 Manuel d'utilisateur télécharger pdf (Page 59)

Trip elapsed drive time

Select this function from the INFO

menu to display a timer.

To operate the Trip Elapsed Drive

Time perform the following:

1. Press and release RESET in order

to start the timer.

2. Press and release RESET to pause the timer.

3. Press and hold RESET for 2 seconds in order to reset the timer.

Outside air temperature (if equipped)

Press and hold the INFO button for

2 seconds to display the outside

temperature. To switch from a blank

display to the temperature display,

hold the INFO button for 2 seconds

until the temperature is seen in the

display. To switch the temperature display to compass display, hold the

INFO button again for 2 seconds until the compass heading is seen in the

display

To turn the display off or change the display from English to metric see

your dealer.

Compass display (if equipped)

Select this function from the INFO menu. Press and hold the INFO

button for 2 seconds to switch from temperature display to compass

display. To switch from a blank display, press and hold the INFO button

for 2 seconds until temperature is displayed. Press and hold the INFO

button again to switch from temperature to compass display.

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antenna. Magnetic

or metallic objects placed in, on or near the vehicle may also affect

compass accuracy.

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass zone/calibration

adjustment.

2005 Taurus (tau)

Owners Guide (post-2002-fmt)

USA (fus)

Driver Controls

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 255 256

Pas de commentaire

Ford 2005 Taurus v.3 Manuel d'utilisateur Page 59