Ford 2005 Five Hundred v.2 Manuel d'utilisateur télécharger pdf (Page 40)

Replacing front parking lamp/turn signal bulbs

1. Make sure headlamp switch is in the OFF position, then open the

hood.

2. Reach up from the underside of the fascia to access the bulb sockets

and connectors.

3. Locate the parking/turn signal

lamp electrical connector and

remove it by pulling it straight off.

4. Remove the bulb socket by

turning it counterclockwise and

pulling it straight out.

5. To remove the bulb, pull it

straight out of the bulb socket.

Install the new bulb(s) in reverse order.

Replacing tail lamp/brake lamp/backup lamp/turn signal lamp bulbs

The tail lamp, brake lamp, backup lamp and turn signal lamp bulbs are

located in the tail lamp assembly. Follow the same steps to replace either

bulb.

1. Backup lamp

2. Brake/tail/turn lamp

3. Tail lamp

1. Make sure the headlamp switch is in the OFF position and open the

trunk.

2. Carefully pull the carpet away to expose the backside of the tail lamp

assembly.

3. Remove the nut and washer assemblies, then pull the lamp assembly

away from the vehicle.

2005 Ford Five Hundred (500)

Owners Guide (post-2002-fmt)

USA_English (fus)

Lights

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 263 264

Pas de commentaire

Ford 2005 Five Hundred v.2 Manuel d'utilisateur Page 40