Introduction 4Instrument Cluster 10Warning and control lights 10Gauges 14Entertainment Systems 17AM/FM stereo with CD 17AM/FM stereo with in-dash six
WARNING LIGHTS AND CHIMESWarning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause extensive repairs. A wa
• the ignition is in the 3 (RUN) position,• you shift into any gear putting the vehicle in motion, and• the brake pedal is released and the vehicle at
3. Enter factory-set 5–digit entry code.4. Press and hold the 7 • 8. While holding the 7 • 8pressthe3• 4.5. Release the 3 • 4.6. Release the 7 • 8.The
If a problem occurs with the SecuriLock娂 system, the indicator will flashrapidly or glow steadily when the ignition is in the 3 (RUN) position. Ifthis
• If two previously programmed coded keys are not available, you musttake your vehicle to your dealer to have the spare key(s)programmed.Please read a
PERIMETER ALARM SYSTEM (IF EQUIPPED)The perimeter anti-theft system will help prevent your vehicle fromunauthorized entry.If there is any potential pe
• Press the 7 • 8 and 9 • 0controls on the keyless entry padat the same time to lock thedoors (driver’s door must beclosed).There is a 20 second count
SEATINGNotes:Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in theevent of a
Adjusting the front manual seat (if equipped)Never adjust the driver’s seat or seatback when the vehicle ismoving.Always drive and ride with your seat
Folding down the front passenger seatback (if equipped)The front passenger seatback can befolded to a horizontal position tomake room for a long load.
Always drive and ride with your seatback upright and the lapbelt snug and low across the hips.Reclining the seatback can cause an occupant to slide un
Check fuel cap: Illuminates whenthe fuel cap may not be properlyinstalled. Continued driving withthis light on may cause the Checkengine warning light
Press the control (if equipped) torecline the seatback forward orrearward.Heated seats (if equipped)To operate the heated seats:• Push the control loc
A position can be recalled:• in any gearshift position if the ignition is not in the RUN position.• only in Park or Neutral if the ignition is in the
Adjusting second row bucket and bench seat backLift the handle to adjust seatback.Using same control will fold theseatback flat.Reclining the seatback
Lift the handle located on the sideof the seat.The seatback will fold flat.Lift the handle all the way up untilthe seat releases from the floor.Rotate
To return the seatback to theupright position• Lift the seatback toward the rearof the vehicle, and• Rotate the seatback until youhear a click, lockin
To return the seatback to the floorfrom tumbled position, rotate theseat down until you hear it latchingto the floor.To return the seatback to theupri
Always latch the vehicle seat to the floor, whether the seat isoccupied or empty. If not latched, the seat may cause injuryduring a sudden stop.Stowin
3. Release the cushion latches by pulling the number 2 strap whilepulling on the strap located at the top of the seatback to tumble the seatall the wa
2. To return the seatback to uprightposition, pull the number 1 strap,then while holding the number 1strap, pull the long strap located onthe seatback
SAFETY RESTRAINTSPersonal Safety System姟The Personal Safety System娂 provides an improved overall level offrontal crash protection to front seat occupa
Safety belt: Reminds you to fastenyour safety belt. A chime will alsosound to remind you to fasten yoursafety belt.Charging system: Illuminates whenth
Driver and passenger dual-stage airbag supplemental restraintsThe dual-stage airbags offer the capability to tailor the level of airbaginflation energ
(child size) occupants from airbag deployments when they areimproperly seated or restrained in the front passenger seat contrary toproper child-seatin
the RCM also monitors the restraints warning light in the instrumentcluster. A difficulty with the system is indicated by one or more of thefollowing.
Each seating position in your vehicle has a specific safety beltassembly which is made up of one buckle and one tongue thatare designed to be used as
Energy Management Feature — Outboard• This vehicle has a safety belt system with an energy managementfeature at the front seats to help further reduce
How to use the automatic locking mode• Buckle the combination lap andshoulder belt.• Grasp the shoulder portion andpull downward until the entirebelt
Safety belt height adjustmentYour vehicle has safety belt heightadjustments for the front outboardseating positions.Adjust the height of the shoulderb
BeltMinder姟Note: If your vehicle is built without the passenger occupantclassification sensor, the passenger BeltMinder娂 feature is not available.The
If... Then...The driver’s or frontpassenger’s safety belt becomesunbuckled for approximately 1minute while the vehicle istraveling at least 3 mph (5km
Reasons given... Consider...“Traffic is light” Nearly 1 of 2 deaths occur insingle-vehicle crashes, many whenno other vehicles are around.“Belts wrink
Speed control: Illuminates whenthe speed control is engaged. Turnsoff when the speed control systemis disengaged.Low washer fluid: Illuminateswhen the
Read Steps1-4thoroughly before proceeding with thedeactivation/activation programming procedure.Note: The driver and front passenger BeltMinder娂 featu
Safety belt extension assemblyIf the safety belt is too short when fully extended, there isa8inch(20 cm) safety belt extension assembly that can be ad
AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS)The instrument panel grab handle should never be used forstorage. The path of an inflating airbag must be ke
Important SRS precautionsThe SRS is designed to work withthe safety belt to help protect thedriver and right front passengerfrom certain upper body in
To properly position yourself away from the airbag:• Move your seat to the rear as far as you can while still reaching thepedals comfortably.• Recline
Determining if the system is operationalThe supplemental restraint system uses a warning indicator in theinstrument cluster or a back-up tone to indic
The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt
• diagnostic module.• and the electrical wiring which connects the components.The diagnostic module monitors its own internal circuits and thesuppleme
the front passenger frontal airbag is off. When the front passenger seat isnot occupied (empty seat) or in the event that the front passengerfrontal a
The front passenger sensing system may detect small or medium objectsplaced on the seat cushion. For most objects that are in the frontpassenger seat,
Parking brake ON: Sounds when the parking brake is left ON anddriven. If the warning stays on after the park brake is off, contact yourdealer as soon
Do not use accessory seat covers. The use of accessory seatcovers may prevent the deployment of the side airbags andincrease the risk of injury in an
Side airbags, in combination with seat belts, can help reduce the risk ofsevere injuries in the event of a significant side impact collision.The side
Safety Canopy姟 system (if equipped)Do not place objects ormount equipment on ornear the headliner at the siderailthat may come into contact with adepl
How does the Safety Canopy姟 system work?The design and development of theSafety Canopy娂 system includedrecommended testing proceduresthat were develop
The Safety Canopy娂 is mounted to roof side-rail sheet metal, behind theheadliner, along the entire side of the vehicle. In certain lateral collisionso
• The readiness light will not illuminate immediately after ignition isturned on.• A series of five beeps will be heard. The tone pattern will repeatp
Follow all the important safety restraint and airbag precautions thatapply to adult passengers in your vehicle.If the shoulder belt portion of a combi
• Can the child stay seated like this for the whole trip?Types of booster seatsThere are two types of belt-positioning booster seats:• Those that are
Follow all instructions provided by the manufacturer of thebooster seat.Never put the shoulder belt under a child’s arm or behind theback because it e
• Put the safety belt in the automatic locking mode. Refer to Automaticlocking mode (passenger side front and outboard rear seatingpositions) (if equi
Fuel gauge: Indicatesapproximately how much fuel is leftin the fuel tank (when the ignitionis in the ON position). The fuelgauge may vary slightly whe
1. Position the child safety seat in aseat with a combination lap andshoulder belt.2. Pull down on the shoulder beltand then grasp the shoulder beltan
4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear
8. Allow the safety belt to retract toremove any slack in the belt.9. Before placing the child in theseat, forcibly move the seat forwardand back to m
60/40 second row seatsDelivery vanFront passenger seating position (delivery van only)1. Position the child safety seat onthe passenger seat cushion.2
3. Grasp the tether strap andposition it to the seat frame.4. Rotate the tether hook, and clipthe tether strap to the seat frame.If the tether strap i
5. Rotate the tether strap clip.6. Install the child safety seat tightlyusing the LATCH anchors or safetybelts. Follow the instructions in thischapter
• 2nd row bench (60/40)• 3rd row benchNote: The cargo tie-downs at therear edge of the floor are nottether anchors.For additional important safety inf
Your vehicle has LATCH anchors for child seat installation at the seatingpositions marked with the child seat symbol.Never attach two LATCHchild safet
INFORMATION ABOUT UNIFORM TIRE QUALITY GRADINGNew vehicles are fitted with tiresthat have a rating on them calledTire Quality Grades. The Qualitygrade
The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not includeacceleration, cornering, hydroplaning o
• With Message CenterTo reset, select the TRIP functionfrom the INFO menu. Depressingthe RESET control forapproximately one second will resetthe trip
• Extra load: A class of P-metric or Metric tires designed to carry aheavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].Increasing the
Inspecting your tiresPeriodically inspect the tire treads for uneven or excessive wear andremove stones, nails, glass or other objects that may be wed
higher than the manufacturer’s recommended cold inflation pressurewhich can be found on either the Safety Compliance Certification Labelwhich is locat
TIRE REPLACEMENT REQUIREMENTSYour vehicle is equipped with tires designed to provide a safe ride andhandling capability.Only use replacement tires and
If you use the temporary spare tire continuously or do not followthese precautions, the tire could fail, causing you to lose controlof the vehicle, po
the road tires and wheels that were originally provided by Ford. If thedissimilar spare tire or wheel is damaged, it should be replaced ratherthan rep
Removing the spare tire and jackIf the 3rd row seat (if equipped) is stowed in the floor, you will need tounstow it to access the spare tire and jack.
When one of the front wheels is off the ground, the transaxlealone will not prevent the vehicle from moving or slipping off thejack, even if the vehic
4. Put the jack in the jack notchnext to the tire you are changing.Turn the jack handle clockwise untilthe wheel is completely off theground.5. Remove
Stowing the tire and jack1. Fully collapse the jack, fold thelug wrench socket into the handleand place the jack and wrench intothe felt bag as shown.
AM/FM STEREO/ SINGLE CD SOUND SYSTEM (IF EQUIPPED)1./ Tuner: Press tomanually go up or down the radiofrequency. Also use in menu modeto select various
If you are stowing the flat tire,remove the “L”-shaped bolt from thelarge wing nut used to secure thespare tire in the vehicle. With the3rd row seat i
Information on “P” type tiresP215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (
Note: You may not find this information on all tires because it is notrequired by federal law.Letter rating Speed rating - mph (km/h)M 81 mph (130 km/
12. Treadwear, Traction and Temperature Grades• Treadwear: The treadwear grade is a comparative rating based on thewear rate of the tire when tested u
Additional information contained on the tire sidewall for “LT” typetires“LT” type tires have some additionalinformation beyond those of “P”type tires;
Information on “T” type tires“T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below:T145/8
TIRE CAREImproper or inadequate vehicle maintenance can also cause tires to wearabnormally. Here are some of the important maintenance items:Tire wear
Safety practicesDriving habits have a great deal to do with your tire mileage and safety.• Observe posted speed limits• Avoid fast starts, stops and t
Wheel misalignment in the front or the rear can cause uneven and rapidtreadwear of your tires and should be corrected by a qualified technicianat a Fo
• Rear Wheel Drive (RWD)vehicles/Four Wheel Drive(4WD)/ All Wheel Drive (AWD)vehicles (front tires at top ofdiagram)Sometimes irregular tire wear can
Balance: Press to adjust the audio between the left and right speakers.Use/ / SEEK .Fade: Press to adjust the audio between the front and rear speaker
tires and chains. If you need to use snow tires and chains, it isrecommended that steel wheels are used of the same size andspecifications as those or
Vehicle Curb Weight – is the weight of your new vehicle when youpicked it up from your dealer plus any aftermarket equipment.Payload – is the combined
Example only:Cargo Weight – includes all weight added to the Base Curb Weight,including cargo and optional equipment. When towing, trailer tongue load
GAW (Gross Axle Weight) – is the total weight placed on each axle(front and rear) – including vehicle curb weight and all payload.GAWR (Gross Axle Wei
GVWR (Gross Vehicle WeightRating) – is the maximumallowable weight of the fully loadedvehicle (including all options,equipment, passengers and cargo).
Maximum Loaded Trailer Weight – is the highest possible weight of afully loaded trailer the vehicle can tow. It assumes a vehicle with onlymandatory o
The following gives you a few examples on how to calculate the availableamount of cargo and luggage load capacity:• Another example for your vehicle w
Do not exceed the GVWR or the GAWR specified on thecertification label.Towing trailers beyond the maximum recommended gross trailerweight exceeds the
Trailer lampsTrailer lamps are required on most towed vehicles. Make sure all runninglights, brake lights, turn signals and hazard lights are working.
RECREATIONAL TOWINGFollow these guidelines for your specific powertrain combination to towyour vehicle for personal travel (such as behind a recreatio
11. Rewind: Press to manuallyreverse in a CD track.12. Memory presets: To set astation: Select frequency bandAM/FM; tune to a station, press andhold a
STARTINGPositions of the ignition1. LOCK, locks the automatictransaxle gearshift lever and allowskey removal. This position also shutsthe engine and a
Do not park, idle, or drive your vehicle in dry grass or other dryground cover. The emission system heats up the enginecompartment and exhaust system,
• Make sure the gearshift lever is inP (Park).3. Turn the key to 3 (ON) withoutturning the key to 4 (START).Make sure the corresponding lights illumin
Starting the engine1. Turn the key to 3 (ON) withoutturning the key to 4 (START).2. Turn the key to 4 (START), thenrelease the key as soon as theengin
BRAKESOccasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, the brake linings may be worn-o
Parking brakeApply the parking brake wheneverthe vehicle is parked. To set theparking brake, press the parkingbrake pedal down until the pedalstops.Th
detecting and controlling wheel spin. The system borrows many of theelectronic elements already present in the anti-lock braking system(ABS).Wheel-spe
• Some noise is normal during operation. If the noise is excessive, checkfor low power steering pump fluid level before seeking service by yourdealer.
3. Locate the white plastic cover atthe front driver side of the gearshiftlever. Locate the screw whichattaches this cover and removeusing a screwdriv
As traditional automatic transmissions/transaxles shift up or down ingears, this shifting in gear ratios is noticeable by increasing anddecreasing eng
Seating and Safety Restraints 106Seating 106Safety restraints 119Airbags 132Child restraints 145Tires, Wheels and Loading 158Tire Information 158Tire
PREMIUM/AUDIOPHILE IN-DASH SIX CD/MP3 SOUND SYSTEM(IF EQUIPPED)1./ Tune/Disc selector:Press to manually go up or downthe radio frequency or to select
R (Reverse)With the gearshift lever in R (Reverse), the vehicle will move backward.Always come to a complete stop before shifting into and out of R(Re
Certain add-on devices such as large trailer hitches, bike orsurfboard racks and any device that may block the normaldetection zone of the RSS system
If your vehicle sustains damage to the rear bumper/fascia, leavingit misaligned or bent, the sensing zone may be altered causinginaccurate measurement
If your vehicle goes off the edge of the pavement• If your vehicle goes off the edge of the pavement, slow down, butavoid severe brake application, ea
Emergency maneuvers• In an unavoidable emergency situation where a sudden sharp turnmust be made, remember to avoid “over-driving” your vehicle (i.e.,
Mud and waterIf you must drive through high water, drive slowly. Traction or brakecapability may be limited.When driving through water, determine the
seeing what conditions are on the other side. Do not drive in reverseover a hill without the aid of an observer.When climbing a steep slope or hill, s
Make sure you allow sufficient distance between you and other vehiclesfor stopping. Drive slower than usual and consider using one of the lowergears.
GETTING ROADSIDE ASSISTANCETo fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program
Canadian customers who require roadside assistance, call1–800–665–2006.If you need to arrange roadside assistance for yourself, Ford MotorCompany will
Bass: Press to adjust the bass setting. Use / / SEEK .Treble: Press to adjust the treble setting. Use/ / SEEK .Balance: Press to adjust the audio betw
The fuel pump shut-off switch islocated in the front passengerfootwell area in the right uppercorner.To reset the switch:1. Turn the ignition OFF.2. C
Standard fuse amperage rating and colorCOLORFuseratingMini fusesStandardfusesMaxi fusesCartridgemaxi fusesFuse linkcartridge5A Tan Tan — — —7.5A Brown
The fuses are coded as follows.Fuse/RelayLocationFuse AmpRatingPassenger Compartment Fuse PanelDescriptionF1 20A High beamsF2 15A Interior lamps (Cour
Fuse/RelayLocationFuse AmpRatingPassenger Compartment Fuse PanelDescriptionF19 10A Anti-lock Brake System (ABS)/Tractioncontrol module, All Wheel Driv
The high-current fuses are coded as follows:Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description1 80A* Interior fuse panel (SJB), SJB fu
Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description16 15A** Traction Control Module (TCM)17 20A** Power point (Console)18 10A** Alterna
Fuse/RelayLocationFuse AmpRatingPower Distribution Box Description43 — Not used44 — Not used45 — Not used46 — Not used47 — Not used481⁄2ISO relay Fog
Preparing your vehicleWhen the battery is disconnected or a new battery is installed, thetransmission must relearn its shift strategy. As a result, th
2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery.3. Connect the negative (-) cable to the negat
4. Make the final connection of the negative (-) cable to an exposedmetal part of the stalled vehicle’s engine, away from the battery and thecarbureto
Compression: Available only in CD mode, brings soft and loud CDpassages together for a more consistent listening level.Repeat: Available only in CD mo
Removing the jumper cablesRemove the jumper cables in the reverse order that they wereconnected.1. Remove the jumper cable from the ground metal surfa
3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery.4. Remove the jumper cable from the positive (+) terminal of
WRECKER TOWINGIf you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, y
In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, flatbed transport vehicle or a car hauling trailer) yourvehic
GETTING THE SERVICES YOU NEEDAt homeYou must take your Ford vehicle to an authorized Ford dealer forwarranty repairs. While any Ford dealership handli
In Canada:Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E41-800-565-3673 (FORD)www.ford.caIf yo
In some states (in the U.S.) you must directly notify Ford in writingbefore pursuing remedies under your state’s warranty laws. Ford is alsoallowed a
THE DISPUTE SETTLEMENT BOARD (U.S. ONLY)The Dispute Settlement Board is:• an independent, third-party arbitration program for warranty disputes.• avai
Board membershipThe Board consists of:• Three consumer representatives• A Ford or Lincoln Mercury dealership representativeConsumer candidates for Boa
Oral presentationsIf you would like to make an oral presentation, indicate YES to question6 on the application. While it is your right to make an oral
14. Seek: Press to access theprevious strong station or track.15. AM/FM: Press to select AM/FMfrequency band.16. ON/OFF/Volume: Press to turnON/OFF. T
UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY)For vehicles delivered to authorized Canadian dealerships. In those caseswhere you continue to
If you did not take advantage of the Ford Extended Service Plan at thetime of purchasing your vehicle, you may still be eligible. Since thisinformatio
ORDERING ADDITIONAL OWNER’S LITERATURETo order the publications in this portfolio, contact Helm, Incorporated at:HELM, INCORPORATEDP.O. Box 07150Detro
WASHING THE EXTERIORWash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is
• Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and industrial fallout before repairing paint chips.• Always
• 3.0L Duratec engine• Never wash or rinse the engine while it is running; water in therunning engine may cause internal damage.PLASTIC (NON-PAINTED)
Do not use sharp objects, such as a razor blade, to clean theinside of the rear window or to remove decals, as it may causedamage to the rear window d
Do not use cleaning solvents, bleach or dye on the vehicle’ssafety belts, as these actions may weaken the belt webbing.Do not use chemical solvents or
Motorcraft Car Wash (Canada only) (CXC-21)Motorcraft Custom Bright Metal Cleaner (ZC-15)Motorcraft Custom Clear Coat Polish (ZC–8–A)Motorcraft Custom
SERVICE RECOMMENDATIONSTo help you service your vehicle:• We highlight do-it-yourself items in the engine compartment for easylocation.• We provide sc
RADIO RECEPTION FACTORSThere are three factors that can affect radio reception:• Distance/strength: The further you travel from an FM station, theweak
OPENING THE HOOD1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column.2. Go to th
IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT3.0L DOHC V6 DURATEC ENGINE1. Engine coolant reservoir2. Power steering fluid reservoir3. Brake fluid
WINDSHIELD WASHER FLUIDAdd fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely.Only use a washer
5. Locate and carefully remove theengine oil level indicator (dipstick).6. Wipe the indicator clean. Insert the indicator fully, then remove itagain.•
• If required, add engine oil to theengine. Refer to Adding engineoil in this chapter.• Do not overfill the enginewith oil. Oil levels above thismark
Engine oil and filter recommendationsLook for this certificationtrademark.Use SAE 5W-20 engine oil.Only use oils “Certified For Gasoline Engines” by t
BATTERYYour vehicle is equipped with aMotorcraft maintenance-free batterywhich normally does not requireadditional water during its life ofservice.How
When lifting a plastic-cased battery, excessive pressure on theend walls could cause acid to flow through the vent caps,resulting in personal injury a
If the battery has been disconnected or a new battery has been installed,the clock and radio settings must be reset once the battery isreconnected.• A
When the engine is cold, check thelevel of the engine coolant in thereservoir.• The engine coolant should be at the “FULL COLD” level or within the“CO
FAMILY ENTERTAINMENT DVD SYSTEM (IF EQUIPPED)Your vehicle may be equipped with a Family Entertainment DVD Systemwhich allows you to watch DVDs, play m
Do not add engine coolant when the engine is hot. Steam andscalding liquids released from a hot cooling system can burn youbadly. Also, you can be bur
1. Before you begin, turn the engine off and let it cool.2. When the engine is cool, wrap a thick cloth around the coolantpressure relief cap on the c
8. Add coolant/water mixturethrough the thermostat housingopening until full at housingopening.9. Install the thermostat housingbleed plug. Install me
If you have to add more than 1.0 quart (1.0 liter) of engine coolant permonth, have your dealer check the engine cooling system. Your coolingsystem ma
• Decreased engine coolant concentrations below 40% willdecrease the freeze protection characteristics of the enginecoolant and may cause engine damag
Observe the following guidelines when handling automotive fuel:• Extinguish all smoking materialsand any open flames beforerefueling your vehicle.• Al
RefuelingFuel vapor burns violently and a fuel fire can cause severeinjuries. To help avoid injuries to you and others:• Read and follow all the instr
If you must replace the fuel filler cap, replace it with a fuel fillercap that is designed for your vehicle. The customer warranty maybe void for any
Do not be concerned if your engine sometimes knocks lightly. However, ifit knocks heavily under most driving conditions while you are using fuelwith t
Replace the fuel filter with an authorized Motorcraft part. Thecustomer warranty may be void for any damage to the fuel systemif an authorized Motorcr
4. ENTER controlPress to select the function highlighted on the active menu. ENTER mayalso be used by some user interactive discs during movie play.5.
• Have the vehicle loading and distribution the same every time.Your results will be most accurate if your filling method is consistent.Calculating fu
• Revving the engine before turning it off may reduce fuel economy.• Using the air conditioner or defroster may reduce fuel economy.•You may want to t
EPA window stickerEvery new vehicle should have the EPA window sticker. Contact yourdealer if the window sticker is not supplied with your vehicle. Th
Exhaust leaks may result in entry of harmful and potentiallylethal fumes into the passenger compartment.Do not make any unauthorized changes to your v
Readiness for Inspection/Maintenance (I/M) testingIn some localities, it may be a legal requirement to pass an I/M test ofthe on-board diagnostics sys
BRAKE FLUIDThe fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels between the “MIN” and“
If your transaxle does not engage normally, do not attempt todrive. The vehicle should be towed to your dealer for evaluation.MOTORCRAFT PART NUMBERSC
REFILL CAPACITIESFluid Ford PartNameApplication CapacityBrake fluid Motorcraft HighPerformanceDOT 3 MotorVehicle BrakeFluidAll Between MAX andMIN on r
Fluid Ford PartNameApplication CapacityCoupler VolvoTransmissionOil, ClutchCoupler 1.5 pints (0.7L)Power Take-offUnit (PTU)Motorcraft SAE75W-90 FuelEf
LUBRICANT SPECIFICATIONSItemsFord PartName orequivalentFord PartNumberFordSpecificationBrake fluid Motorcraft HighPerformanceDOT 3 MotorVehicle BrakeF
• Press the PREV control to movethe cursor one position downward• Press the REV control to movethe cursor left one position• Press the FWD control to
ItemsFord PartName orequivalentFord PartNumberFordSpecificationPower TransferUnitMotorcraft SAE75W-90 FuelEfficient HighPerformanceRear AxleLubricantX
ENGINE DATAEngine 3.0L-DOHC V6 engineDisplacement 183 cubic inchesRequired fuel 87 octaneFiring order 1–4–2–5–3–6Spark plug gap (0.052–0.056 inch) 1.3
523412005 Freestyle (219)Owners Guide (post-2002-fmt)USA (fus)Maintenance and Specifications272
IDENTIFYING YOUR VEHICLECertification labelThe National Highway Traffic SafetyAdministration Regulations requirethat a Safety ComplianceCertification
The Vehicle Identification Number (VIN) contains the following information:1. World manufacturer identifier2. Brake type and Gross VehicleWeight Ratin
GENUINE FORD ACCESSORIES FOR YOUR VEHICLEA wide selection of Genuine Ford Accessories are available for yourvehicle through your local authorized Ford
Interior styleCarpeted floor matsElectrochromic mirror w/compassElectrochromic mirror w/compass and homelinkElectrochromic mirror w/compass and temper
For maximum vehicle performance, keep the following information inmind when adding accessories or equipment to your vehicle:• When adding accessories,
AAccessory delay ...66Air cleaner filter ...266Air conditioning ...42, 44, 46, 48Airbag supplemental r
washing ...233waxing ...233wheels ...234wiper bl
CD play modePress NEXT during CD play toadvance to the next track. If youpress NEXT while the last track isplaying, the system will wrap aroundto the
specifications ...269, 271Exhaust fumes ...193FFluid capacities ...267Foglamps ...
KKeyless entry system ...98autolock ...99Keyspositions of the ignition ...190LLampsautolamp syst
Remote entry system ...93illuminated entry ...97Reverse sensing system ...200Roadside assistance ...
Transaxlefluid, refill capacities ...267lubricant specifications ...271Transmission ...197brake-shift inte
284
285
287
288
Remote control1. REV (REVERSE) controlPress to reverse the direction of the DVD movie.2. FWD (FORWARD) controlPress to advance the direction of the DV
Cleaning 233Maintenance and Specifications 239Engine compartment 241Engine oil 242Battery 246Engine Coolant 248Fuel information 254Part numbers 266Ref
7. MENU/MODE controlIn DVD playback mode, press to access the disc menu.In stop mode, press to change media types (e.g. AM, FM, CD...)8. VOL (VOLUME)
Battery replacementBatteries are provided with the remote control unit. Since all batterieshave a limited shelf life, replace them when the remote con
Wireless headphonesYour system is equipped with 2 setsof wireless headphones. (Two AAAbatteries are needed to operate theheadphones.) Batteries are in
Note: The volume level of the wireless headphones can only becontrolled by the thumbwheel. Neither the remote control nor the rearseat controls will a
Playback and format• The DVD player of your Family Entertainment DVD System can onlybe used in the “playback” mode. (The DVD player does not offer are
film attached, and discs with homemade paper (adhesive) labelsshould not be inserted into the player. The label may peel andcause the disc to become j
On-screen indicatorsEach time a control is pressed, the operational status of the DVD playeris shown on the screen. The following are some possible in
The front glass on the flip-down liquid crystal display (LCD) maybreak when hit with a hard surface. If the glass breaks, do nottouch the liquid cryst
However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interferenceto radio
Foreign substancesExercise care to prevent dirt and foreign objects from entering the DVDplayer compartment. If liquid is accidentally spilled onto th
CALIFORNIA Proposition 65 WarningWARNING: Engine exhaust, some of its constituents, andcertain vehicle components contain or emit chemicals known toth
MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED)1. Temperature selection:Controls the temperature of theairflow in the vehicle.2. Air flow sele
Operating tips• To reduce fog build up on the windshield during humid weather, placethe air flow selector in theposition.• To reduce humidity build up
DUAL ZONE AUTOMATIC TEMPERATURE CONTROL(IF EQUIPPED)1.Defrost: Distributes outside air through the windshield defrosterand demister vents. Can be used
8. : Distributes air through the instrument panel and floor vents.9.: Distributes air through the instrument panel vents.10. Manual override controls:
DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITHHEATED SEATS (IF EQUIPPED)1.Defrost: Distributes outside air through the windshield defrosterand demister
8. Airflow direction control: Press to toggle through the airdistribution modes listed below. The selected mode will be shown in thedisplay.: Distribu
DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITH REARPASSENGER COMPARTMENT CLIMATE CONTROL (IF EQUIPPED)1.Defrost: Distributes outside air through the win
odors from reaching the interior of the vehicle. Recirculation can beengaged manually in any other airflow selection except defrost.Recirculation may
DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITHHEATED SEATS AND REAR PASSENGER COMPARTMENTCLIMATE CONTROL (IF EQUIPPED)1.Defrost: Distributes outside air
7. Recirculated air: Press to activate/deactivate air recirculationin the cabin. Recirculated air may reduce the amount of time to cooldown the interi
SAFETY AND ENVIRONMENT PROTECTIONWarning symbols in this guideHow can you reduce the risk of personal injury to yourself or others? Inthis guide, answ
17. Driver temperature control: Press to increase/decrease thetemperature on the driver side of the cabin. Sets the passenger sidetemperature also whe
To aid in side window defogging/demisting in cold weather:1. Select.2. Select A/C.3. Adjust the temperature control to maintain comfort.4. Set the fan
HEADLAMP CONTROLTurns the lamps off.Turns on the parking lamps,instrument panel lamps, licenseplate lamps and tail lamps.Turns the headlamps on.Autola
5. Wait the desired amount of time for the exit delay you want (up tothree minutes), then turn the headlamp switch to. The headlampswill turn off.Fogl
High beamsPull the lever towards you, to thesecond detent, to activate. Pull thelever towards you again todeactivate.Flash to passPull toward you, to
Vertical aim adjustment1. Park the vehicle directly in front of a wall or screen on a level surface,approximately 25 feet (7.6 meters) away.• (1) 8 fe
HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND ISNON-ADJUSTABLE.TURN SIGNAL CONTROL• Push down to activate the leftturn signal.• Push up to activ
BULB REPLACEMENTHeadlamp CondensationThe headlamps are vented to equalize pressure. When moist air entersthe headlamp(s) through the vents, there is a
Replacing headlamp (high/low beam) bulbs1. Make sure headlamp switch is in the OFF position, then open thehood.2. Reach behind the headlamp assembly t
Replacing front sidemarker bulbs1. Make sure headlamp switch is in the OFF position, then open thehood.2. Reach behind the headlamp assembly to access
SPECIAL NOTICESEmission warrantyThe New Vehicle Limited Warranty includes Bumper-to-BumperCoverage, Safety Restraint Coverage, Corrosion Coverage, and
Replacing high-mount brake lamp bulbs1. Make sure the ignition control isin the OFF position.2. Remove the two screws.3. Unclip the bulb holder from t
MULTI-FUNCTION LEVERWindshield wiper: For intermittentoperation, move control up oneposition.Adjust the rotary control to thedesired speed setting.Mis
Rear window wiper/washer controlsFor rear wiper operation, rotate therear window wiper and washercontrol to the desired position.Select:2 — One second
TILT STEERING WHEELTo adjust the steering wheel:1. Pull down and hold the steeringwheel release control.2. Move the steering wheel up ordown until you
Conversation mirror (if equipped)The conversation mirror allows the driver to view the rear seating area.This does not replace the rear view mirror.Pu
POWER WINDOWSDo not leave children unattended in the vehicle and do not letchildren play with the power windows. They may seriously injurethemselves.W
If the switch is pressed and held to the normal open or ONE TOUCHDOWN position during a ONE TOUCH UP event, the window will stop. If,after 1/2 second
MIRRORSPower side view mirrorsTo adjust your mirrors:1. Rotate the control clockwise toadjust the right mirror and rotatethe control counterclockwise
POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED)The accelerator and brake pedalshould only be adjusted when thevehicle is stopped and the gearshiftlever is
3. Press the SET + control andrelease it.4. Take your foot off the acceleratorpedal.5. The indicatorlight on theinstrument cluster will turn on.Note:•
Special instructionsFor your added safety, your vehicle is fitted with sophisticated electroniccontrols.Please read the section Supplemental restraint
Increasing speed while using speed controlThere are two ways to set a higherspeed:• Press and hold the SET + controluntil you get to the desiredspeed,
Turning off speed controlThere are two ways to turn off the speed control:• Depress the brake pedal or pressCNCL (Cancel). This will noterase your veh
In any mode:• Press VOL up or down to adjustthe volume.• Press MUTE to mute the volume.MOON ROOF (IF EQUIPPED)You can move the glass panel of the moon
HOMELINK姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED)The HomeLink威 Wireless Control System, located on the driver’s visor,provides a convenient way to repla
1. Press and hold the two outsidebuttons releasing only when theindicator light begins to flash after20 seconds. Do not repeat Step 1to program additi
7. Press and release the “learn” or “smart” button. (The name and colorof the button may vary by manufacturer.)Note: There are 30 seconds in which to
Operating the HomeLink姞 Wireless Control SystemTo operate, simply press and releasethe appropriate HomeLink威 button.Activation will now occur for thet
MESSAGE CENTER (IF EQUIPPED)With the ignition in the ON position,the message center, located on yourinstrument cluster, displaysimportant vehicle info
DTE is calculated using a running average fuel economy, which is basedon your recent driving history of 500 miles (800 km). This value is notthe same
Trip elapsed drive timeSelect this function from the INFOmenu to display a timer.To operate the Trip Elapsed DriveTime perform the following:1. Press
These are some of the symbols you may see on your vehicle.Vehicle Symbol GlossarySafety AlertSee Owner’s GuideFasten Safety Belt Air Bag-FrontAir Bag-
Note: If the compass displays ⬙CAL 000000.0 mi⬙ instead of headinginformation, the compass will need to be calibrated. Slowly drive thevehicle in a ci
10. The compass is now calibrated.Setup menuPress this control for the followingdisplays:• Language• Units (English/Metric)• System CheckLanguage1. Se
System checkSelecting this function from theSETUP menu causes the messagecenter to cycle through each of thesystems being monitored. For eachof the mo
The message center will display the last selected feature if there are nomore warning messages. This allows you to use the full functionality ofthe me
Warnings StatusLow brake fluid Warning returns after the ignition keyis turned from OFF to RUNLiftgate ajar (if equipped)Trunk ajar (if equipped)Check
AWD MALFUNCTION (if equipped). Displayed when the AWDsystem is not operating properly. If the warning stays on or continues tocome on, contact your de
COOLANT LEVEL LOW. Displayed when the engine coolant is low.Stop the vehicle as soon as safely possible, turn off the engine and let itcool. Check the
To reset the oil monitoring system to your personalized oil life %:1. From step 3 above.2. Release the RESET controlmomentarily, then press RESET andS
CENTER CONSOLEYour vehicle may be equipped with a variety of console features. Theseinclude:• Utility compartment with powerpoint• Gear Shift• Cup hol
Mobile Communication Equipment includes, but is not limited to cellularphones, pagers, portable email devices, in-vehicle communicationssystems, telem
Vehicle Symbol GlossaryPower WindowsFront/RearPower Window LockoutChild Safety DoorLock/UnlockInterior LuggageCompartment ReleaseSymbolPanic Alarm Eng
CARGO AREA FEATURESCargo net (if equipped)The cargo pouch net secureslightweight objects in the cargoarea. Attach the net to the anchorsprovided. Do n
KEYSOne key operates all the locks and starts the vehicle. Always carry aspare key with you in case of an emergency.Your keys are programmed to your v
Before starting, ensure the ignition is in the 1 (LOCK) position and allvehicle doors are closed. You must complete Steps 1–5 within 30 secondsor the
REMOTE ENTRY SYSTEMThis device complies with part 15 of the FCC rules and with RS-210 ofIndustry Canada. Operation is subject to the following two con
The remote entry system activates the illuminated entry feature; thisfeature turns on the lamps for 25 seconds or until the ignition is turnedto the 3
Activating the memory seat featureTo activate this feature:1. Position the seat, mirrors and adjustable pedals to the positiondesired.2. Press the SET
3. Remove the old battery. Note: Please refer to local regulations whendisposing of transmitter batteries.4. Insert the new battery. Refer to the diag
6. The doors will lock, then unlock, to confirm that each remote entrytransmitter has been programmed.7. Repeat Step 5 to program each additional remo
The lights will turn off if all the doors and the liftgate remain closed and• 25 seconds elapse, or• the key is inserted in the ignition.KEYLESS ENTRY
5. The doors will again lock then unlock to confirm that your personalkeycode has been programmed to the module.Tips:• Do not set a code that uses fiv
Commentaires sur ces manuels