Ford 2005 F-150 Manuel d'utilisateur télécharger pdf (Page 91)

To program the transmitters yourself:

• Unlock all doors using the power

door lock/unlock control. Insert a

key and turn the ignition from

the 1 (OFF/LOCK) to the 3 (ON)

position and cycle between 1

(OFF/LOCK) and 3 (ON) eight

times in rapid succession (within

10 seconds) with the eighth turn

ending in the 3 (ON) position.

The locks will cycle to confirm

that the programming mode has been entered.

• Within 20 seconds, program a remote transmitter by pressing any

button on a transmitter. The locks will cycle once to confirm that the

remote transmitter has been programmed. (If more than 20 seconds

pass before pressing a remote transmitter button, the programming

mode will exit and the procedure will have to be repeated.)

• Repeat the previous step to program additional remote transmitters.

The locks will cycle once to confirm that each remote transmitter has

been programmed.

• When you have completed programming the remote transmitters, turn

the ignition to the 1 (OFF/LOCK) position or wait 20 seconds. Again

the doors will lock/unlock to confirm programming has been

completed.

Illuminated entry

The interior lamps illuminate when the remote entry system is used to

unlock the door(s) or sound the personal alarm, or when the factory set

5-digit code or your personal code are correctly entered into the keyless

keypad.

The illuminated entry system will turn off the interior lights if:

• the ignition switch is turned to the 3 (ON) position, or

• the remote transmitter lock control is pressed, or

• after 25 seconds of illumination.

2005 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 311 312

Pas de commentaire

Ford 2005 F-150 Manuel d'utilisateur Page 91