Ford 2005 F-150 Manuel d'utilisateur télécharger pdf (Page 88)

The (lock) and (unlock) features will work again after:

• a door has become ajar,

• the ignition is turned to the 3 (ON) position, or

• using the UNLOCK

control on your remote entry transmitter or

unlocking via the keyless entry keypad.

Deactivating/activating power door lock/unlock disable feature

All vehicle doors must be closed before beginning the procedure. You

must complete Steps 1–5 within 30 seconds, or the procedure will have

to be repeated. If the procedure needs to be repeated, you must wait a

minimum of 30 seconds to begin again.

1. Turn the ignition to the 3 (ON) position, then press the

button

three times.

2. Turn the ignition to the 1 (OFF/LOCK) position, then press the

button three times.

3. Turn the ignition to the 3 (ON) position; the horn will chirp to

indicate the driver configuration mode has been activated.

4. Within five seconds, press the

control two times. Note: One horn

chirp should be heard, indicating the system has been disabled.

5. Turn the ignition to the 1 (OFF/LOCK) position to exit programming.

Note: After exiting the driver configuration mode, the horn will chirp

once to indicate a feature has been activated/deactivated.

Sounding a panic alarm

Press

to activate the alarm. Press again or turn the ignition to 2

(ACCESSORY) or 3 (ON) to deactivate.

Note: The panic alarm will only operate when the ignition is in the 1

(OFF/LOCK) position.

Memory feature (if equipped)

The remote entry system can also control the memory feature.

Press the

control once to unlock the driver’s door. Pressing the

control will automatically move the seat and adjustable pedals to the

desired memory position (the memory position corresponds to the

transmitter being used).

2005 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 311 312

Pas de commentaire

Ford 2005 F-150 Manuel d'utilisateur Page 88