Ford 2004 Focus v.1 Manuel d'utilisateur télécharger pdf (Page 194)

Checking and adding manual transmission fluid (if equipped)

1. Clean the filler plug.

2. Remove the filler plug and

inspect the fluid level.

3. Fluid level should be at the

bottom of the opening.

4. Add enough fluid through the

filler opening so that the fluid level

is at the bottom of the opening.

5. Install and tighten the fill plug

securely.

Use only fluid that meets Ford specifications. Refer to Lubricant

Specifications in this chapter.

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADING

New vehicles are fitted with tires

that have a rating on them called

Tire Quality Grades. The Quality

grades can be found where

applicable on the tire sidewall

between tread shoulder and

maximum section width. For

example:

• Treadwear 200 Traction AA Temperature A

These Tire Quality Grades are determined by standards that the United

States Department of Transportation has set.

Tire Quality Grades apply to new pneumatic tires for use on passenger

cars. They do not apply to deep tread, winter-type snow tires,

space-saver or temporary use spare tires, tires with nominal rim

diameters of 10 to 12 inches or limited production tires as defined in

Title 49 Code of Federal Regulations Part 575.104(c)(2).

U.S. Department of Transportation-Tire quality grades: The U.S.

Department of Transportation requires Ford to give you the following

information about tire grades exactly as the government has written it.

2004 Focus (foc)

Owners Guide (post-2002-fmt)

USA English (fus)

Maintenance and Specifications

194

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 231 232

Pas de commentaire

Ford 2004 Focus v.1 Manuel d'utilisateur Page 194