Ford 2003 F-550 v.5 Manuel d'utilisateur télécharger pdf (Page 81)

How to disengage the automatic locking mode

Disconnect the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

After any vehicle collision, the front passenger and rear outboard

seat belt systems must be checked by a qualified technician to

verify that the “automatic locking retractor” feature for child seats is

still functioning properly. In addition, all seat belts should be checked

for proper function.

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if

the seat belt assembly “automatic locking retractor” feature or

any other seat belt function is not operating properly when checked

according to the procedures in Workshop Manual. Failure to replace

the Belt and Retractor assembly could increase the risk of injury in

collisions.

Energy Management Feature

• This vehicle has a seat belt system with an energy management

feature at the front outboard seating positions to help further reduce

the risk of injury in the event of a head-on collision.

• The front outboard seat belt systems have a retractor assembly that is

designed to pay out webbing in a controlled manner. This feature is

designed to help reduce the belt force acting on the occupant’s chest.

Safety belt replacement label

The short plastic boot on the front

safety belt at the passenger

outboard anchor location covers a

“Replace Belt” label on the safety

belt.

2003 F250/350/450/550 (f23)

Owners Guide (post-2002-fmt)

USA English (fus)

Seating and Safety Restraints

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 279 280

Pas de commentaire

Ford 2003 F-550 v.5 Manuel d'utilisateur Page 81