Ford 2003 Excursion v.1 Manuel d'utilisateur télécharger pdf (Page 83)

Your vehicle comes with two coded keys; additional coded keys may be

purchased from your dealer. The dealer can program your spare keys to

your vehicle or you can program the keys yourself. Refer to

Programming spare keys for instructions on how to program the coded

key.

Note: The SecuriLock娂 passive anti-theft system is not compatible with

non-Ford aftermarket remote start systems. Use of these systems may

result in vehicle starting problems and a loss of security protection.

Note: Large metallic objects, electronic devices that are used to

purchase gasoline or similar items, or a second coded key on the same

key chain may cause vehicle starting issues. You need to prevent these

objects from touching the coded key while starting the engine. These

objects will not cause damage to the coded key, but may cause a

momentary issue if they are too close to the key when starting the

engine. If a problem occurs, turn the ignition off, remove all objects on

the key chain away from the coded key and restart the engine.

Automatic arming

The vehicle is armed immediately

after switching the ignition to the 3

(OFF) position.

The

THEFT

indicator will flash

every two seconds when the vehicle

is armed.

Automatic disarming

Switching the ignition to the 4 (ON) position with a coded key disarms

the vehicle.

• The

THEFT

indicator will illuminate for three seconds and then go

out.

• If the

THEFT

indicator stays on for an extended period of time or

flashes rapidly, have the system serviced by your dealer.

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,

you will need to have your vehicle towed to a dealership. The key codes

need to be erased from your vehicle and new coded keys will need to be

programmed.

Locks and Security

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 239 240

Pas de commentaire

Ford 2003 Excursion v.1 Manuel d'utilisateur Page 83