Ford 2003 Excursion v.1 Manuel d'utilisateur télécharger pdf (Page 167)

1. Use only a 12–volt supply to start your vehicle.

2. Do not disconnect the battery of the disabled vehicle as this could

damage the vehicle’s electrical system.

3. Park the booster vehicle close to the hood of the disabled vehicle

making sure the two vehicles do not touch. Set the parking brake on

both vehicles and stay clear of the engine cooling fan and other moving

parts.

4. Check all battery terminals and remove any excessive corrosion before

you attach the battery cables. Ensure that vent caps are tight and level.

5. Turn the heater fan on in both vehicles to protect any electrical

surges. Turn all other accessories off.

Connecting the jumper cables

1. Connect the positive (+) booster cable to the positive (+) terminal of

the discharged battery.

Note: In the illustrations, lightning bolts are used to designate the

assisting (boosting) battery.

–

2003 U137 (hdw)

New Owners Guide own2002 (own2002)

USA English (fus)

Roadside Emergencies

167

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 239 240

Pas de commentaire

Ford 2003 Excursion v.1 Manuel d'utilisateur Page 167