Ford 2003 Crown Victoria v.3 Manuel d'utilisateur télécharger pdf (Page 66)

3. Press and hold the MODE control

until VAR appears in the display,

then release. The display should

show the current zone number.

4. Press the MODE control until the

desired zone number appears. The

display will flash and then return to

normal operation. The zone is now

updated.

Compass calibration adjustment

Perform this adjustment in an open

area free from steel structures and

high voltage lines:

1. Press and hold the MODE control

until CAL appears in the display

(approximately eight seconds) and

release.

2. Drive the vehicle slowly (less

than 5 km/h [3 mph]) in circles until

CAL indicator turns off in about 2–3 complete circles.

3. The compass is now calibrated.

OVERHEAD CONSOLE WITH MOON ROOF (IF EQUIPPED)

The appearance of your vehicle’s overhead console will vary according to

your option package. Some of the features in the overhead console

include Compass, Homelink, and Moon Roof controls.

Compass mode

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antenna. Magnetic

or metallic objects placed in, on or near the vehicle may also affect

compass accuracy.

1. Turn ignition to the ON position.

2. Start the engine.

Driver Controls

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 247 248

Pas de commentaire

Ford 2003 Crown Victoria v.3 Manuel d'utilisateur Page 66