Ford 2002 Crown Victoria v.1 Manuel d'utilisateur télécharger pdf (Page 103)

If your keys are lost or stolen you

will need to do the following:

• Use your spare key to start the

vehicle, or

• Have your vehicle towed to a

dealership or locksmith. The key

codes will need to be erased from

your vehicle and new key codes will need to be re-coded.

Replacing coded keys can be very costly and you may want to store an

extra programmed key away from the vehicle in a safe place to prevent

an unforeseen inconvenience.

The correct coded key must be used for your vehicle. The use of the

wrong type of coded key may lead to a “NO-START” condition.

If an unprogrammed key is used in the ignition it will cause a

“NO START” condition.

Programming spare keys

A maximum of eight keys can be coded to your vehicle. Only

SecuriLocky keys can be used. To program a coded key yourself, you

will need two previously programmed coded keys (keys that already

operate your vehicle’s engine) and the new unprogrammed key(s) readily

accessible for timely implementation of each step in the procedure.

If two previously programmed coded keys are not available, you must

bring your vehicle to your dealership to have the spare coded key(s)

programmed.

Please read and understand the entire procedure before you begin.

Locks and Security

103

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 247 248

Pas de commentaire

Ford 2002 Crown Victoria v.1 Manuel d'utilisateur Page 103