Ford 2001 Taurus Manuel d'utilisateur télécharger pdf (Page 77)

2. Press the 1/2 control within five

seconds of step 1.

3. Enter your personal 5 digit code.

Enter each digit within five seconds

of the previous one.

Do not set a code that includes

three of the same number or

presents them in sequential order.

Thieves can easily figure out these types of codes.

Your personal code does not replace the permanent code that the

dealership gave you. You can use either code to unlock your vehicle. If a

second personal code is entered, the module will erase the first personal

code in favor of the new code.

To exit, press 7/8 and 9/0 simultaneously or allow more than 5 seconds

to elapse since a button press occured and the 5 digit keycode will be

programed.

If you wish to erase your personal code, use the following instructions:

Erasing personal code

1. Enter the factory-set code.

2. Press 1/2 within five seconds of

step 1 and release.

3. Press the 1/2 control and hold for

2 seconds to erase the customer

programmed keycode, within five

seconds of step 2.

The system will now only respond

to the factory-set code.

Unlocking the doors and releasing the trunk with the keyless entry

system

The driver’s door must be unlocked before any other. If more than five

seconds pass between pressing numbers, enter the code again. The

system has shut down if the keypad light is out. If the keyless entry

system does not work, use the key or remote entry transmitter(s).

1. To unlock the driver’s door, enter one of the two codes. After pressing

the fifth number, the driver’s door unlocks.

1 2

45678

1 2

45678

Controls and features

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 255 256

Pas de commentaire

Ford 2001 Taurus Manuel d'utilisateur Page 77