Ford 2000 Ranger Manuel d'utilisateur télécharger pdf (Page 116)

To return to (Overdrive) mode, press the transmission control

switch. The TCIL will no longer be illuminated.

Each time the vehicle is started, the transmission will automatically

return to normal

(Overdrive) mode.

2 (Second)

Use 2 (Second) to start-up on

slippery roads or to provide

additional engine braking on

downgrades.

1 (First)

Use 1 (First) to provide maximum

engine braking on steep

downgrades. Upshifts can be made

by shifting to 2 (Second) or to

(Overdrive). Selecting 1 (Low) at

higher speeds causes the transmission to shift to a lower gear and will

shift to 1 (First) after the vehicle decelerates to the proper vehicle

speed.

Forced Downshifts

To gain acceleration in (Overdrive) or Drive (O/D OFF) when

passing another vehicle, push the accelerator to the floor. The

transmission will downshift to the appropriate gear: fourth, third, second

or first gear.

Manual transmission operation (if equipped)

Using the clutch

Vehicles equipped with a manual

transmission have a starter interlock

that prevents Starting the engine

unless the clutch pedal is fully

depressed.

When starting a vehicle with a

manual transmission:

1. Hold down the brake pedal.

2. Depress the clutch pedal.

Driving

116

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 239 240

Pas de commentaire

Ford 2000 Ranger Manuel d'utilisateur Page 116