Ford 2000 Ranger Manuel d'utilisateur télécharger pdf (Page 69)

Procedure to program spare SecuriLockY keys to your vehicle

New SecuriLocky keys must have the correct mechanical key cut for

your vehicle.

Conventional (non-SecuriLocky) keys cannot be programmed to your

vehicle.

You will need to have two previously programmed SecuriLocky keys and

the new unprogrammed SecuriLocky key readily accessible for the

procedure. Please read and understand the entire procedure before you

begin.

1. Insert the first previously programmed SecuriLocky key into the

ignition and turn the ignition from OFF to ON (maintain ignition in ON

for at least one second).

2. Turn ignition to OFF and remove the first SecuriLocky key from the

ignition.

3. Within five seconds of turning the ignition to OFF, insert the second

previously programmed SecuriLocky key into the ignition and turn the

ignition from OFF to ON (maintain ignition in ON for at least one second

but no more than five seconds).

4. Turn the ignition to OFF and remove the second SecuriLocky key

from the ignition.

5. Within 10 seconds of turning the ignition to OFF, insert the

unprogrammed SecuriLocky key (new key/valet key) into the ignition

and turn the ignition from OFF to ON (maintain ignition in ON for at

least one second). This step will program your new SecuriLocky key.

6. To program additional SecuriLocky key(s), repeat this procedure from

step 1.

If the programming procedure was successful, the new SecuriLocky

key(s) will start the vehicle’s engine. The theft indicator (located on the

instrument cluster) will light for three seconds and then go out.

If the programming procedure was not successful, the new SecuriLocky

key(s) will not operate the vehicle’s engine. The theft indicator will flash

on and off. Wait at least one minute and then repeat the procedure from

step 1. If failure repeats, bring your vehicle to your dealership to have

the spare SecuriLocky key(s) programmed.

Controls and features

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 239 240

Pas de commentaire

Ford 2000 Ranger Manuel d'utilisateur Page 69