Ford 2000 Escort Manuel d'utilisateur télécharger pdf (Page 168)

Using the right bulbs

Replacement bulbs are specified in the chart below. Headlamp bulbs

must be marked with an authorized “D.O.T.” for North America and an

“E” for Europe to assure lamp performance, light brightness and pattern

and safe visibility. The correct bulbs will not damage the lamp assembly

or void the lamp assembly warranty and will provide quality bulb burn

time.

Function Trade Number

Front park/turn lamps 3457 NAK (amber)

Foglamps (if equipped) 881

Headlamps-aero high and low beam 9007

Rear license plate lamps 168

High-mount brake lamp 921

Backup lamps 3156K

Brake lamps 3157K

Interior overhead lamp 12V/10W

All replacement bulbs are clear in color except where noted.

To replace all instrument panel lights - see your dealer

AIMING THE HEADLAMPS

Your vehicle is equipped with a Vehicle Headlamp Aim Device (VHAD)

on each headlamp. Each headlamp may be properly aimed in the vertical

(up/down) and the horizontal (left/right) directions using your VHAD

system. The headlamps on your vehicle are properly aimed at the

assembly plant.

A bubble (vertical indicator) that is not centered between the two red

lines does not necessarily indicate out-of-aim headlamps. If your vehicle

is not positioned on a level surface, the slope will be included in the

vertical indication. Therefore, vertical and horizontal headlamp

adjustment should be performed only when the beam direction appears

to be incorrect.

You will need one 4 mm wrench or socket to make the adjustments.

If the vehicle has been in an accident, the vehicle’s front structure

should be properly aligned before aiming the headlamps.

Maintenance and care

168

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 199 200

Pas de commentaire

Ford 2000 Escort Manuel d'utilisateur Page 168