Ford 2000 Escort Manuel d'utilisateur télécharger pdf (Page 164)

5. Remove the bulb retaining ring by

rotating it counterclockwise.

6. Without turning, remove the old

bulb from the lamp assembly by

pulling it straight back out of the

lamp assembly and replace.

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

7. Install the new bulb in lamp assembly by pushing straight in with the

bulb’s plastic base facing upward. Turn the bulb slightly to align the

grooves in the plastic base with the tabs in the lamp assembly.

8. Install the bulb retaining ring over the plastic base and lock the ring

by rotating it clockwise until it snaps into place.

9. Connect the electrical connector into the plastic base until it “snaps.”

10. Install the protective dust shield and lock the shield by rotating it

clockwise until it locks into position.

11. Connect the headlamp wiring socket to the in-line connector.

12. Turn the headlamps on and make sure they work properly. If the

headlamp was correctly aligned before you changed the bulb, you should

not need to align it again.

Maintenance and care

164

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 199 200

Pas de commentaire

Ford 2000 Escort Manuel d'utilisateur Page 164