Ford 2000 Escort Manuel d'utilisateur télécharger pdf (Page 167)

License plate lamps

To change the license plate bulbs:

1. Remove two screws and the

license plate lamp assembly from

the rear bumper.

2. Carefully pull the bulb out from

the lamp assembly and push in the

new bulb.

3. Install the lamp assembly on rear

bumper with two screws.

Replacing backup lamp bulbs

For bulb replacement, see a dealer or qualified technician.

INTERIOR BULBS

Dome lamp

1. Remove the lamp lens by applying

pressure to both tabs at the top of

the lamp and pulling lens

downward.

2. Pull out the burned-out bulb and

install a new one.

3. Install the lamp lens by applying

pressure to both sides of the lamp

lens and popping the lamp lens up

on the assembly.

Map lamps

For bulb replacement, see a qualified service technician or your dealer.

OFF DOOR ON

Maintenance and care

167

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 199 200

Pas de commentaire

Ford 2000 Escort Manuel d'utilisateur Page 167