Ford 1999 Windstar Manuel d'utilisateur télécharger pdf (Page 212)

Replacing the tires

Replace the tires when the wear

band is visible through the tire

treads.

When replacing full size tires, never mix radial, bias-belted, or

bias-type tires. Use only the tire sizes that are listed on the tire

pressure decal. Make sure that all tires are the same size, speed rating,

and load-carrying capacity. Use only the tire combinations

recommended on the decal. If you do not follow these precautions,

your vehicle may not drive properly and safely.

Make sure that all replacement tires are of the same size, type,

load-carrying capacity and tread design (e.g., “All Terrain”, etc.),

as originally offered by Ford.

Do not replace your tires with “high performance” tires or larger

size tires.

Failure to follow these precautions may adversely affect the

handling of the vehicle and make it easier for the driver to lose

control and roll over.

Tires that are larger or smaller than your vehicle’s original tires may also

affect the accuracy of your speedometer.

Maintenance and care

212

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 247 248

Pas de commentaire

Ford 1999 Windstar Manuel d'utilisateur Page 212