Ford 1999 Windstar Manuel d'utilisateur télécharger pdf (Page 193)

• If the oil level is below the ADD

or MIN mark, add enough oil to

raise the level within the

ADD-FULL or within the

MIN-MAX range.

• Oil levels above the F in FULL or above the MAX mark, may cause

engine damage. Some oil must be removed from the engine by a

service technician.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark or the letter F in FULL on the dipstick.

Maintenance and care

193

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 247 248

Pas de commentaire

Ford 1999 Windstar Manuel d'utilisateur Page 193