Ford 1999 Windstar Manuel d'utilisateur télécharger pdf (Page 227)

Replacing tail lamp/backup lamp bulbs

1. Open the liftgate to expose the

tail lamp assemblies.

2. Remove the two screws from the

lamp assembly.

3. Carefully remove the lamp

assembly by pulling it rearward

about 45 degrees.

4. Rotate bulb socket

counterclockwise

⁄

turn and

remove from lamp assembly.

5. Pull bulb straight out of socket and push in new bulb.

6. To complete installation, follow the removal procedure in the reverse

order.

Replacing license plate lamp bulbs

To change the license plate bulbs:

1. Remove two screws and the

license plate lamp assembly from

the liftgate.

2. Remove bulb socket by pulling it

straight out of the lamp assembly.

3. Carefully pull the bulb out from

the socket and push in the new

bulb.

4. Push bulb socket in to the lamp

assembly.

5. Install the lamp assembly on

liftgate with two screws.

High-mount brakelamp bulbs

For bulb replacement, see a dealer or qualified technician.

Cornering lamp bulbs

For bulb replacement, see a dealer or qualified technician.

Maintenance and care

227

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 247 248

Pas de commentaire

Ford 1999 Windstar Manuel d'utilisateur Page 227