Ford 2015 F-550 v.1 Manuel d'utilisateur télécharger pdf (Page 218)

WARNING

Do not connect the end of the

second cable to the negative (-)

terminal of the battery to be jumped.

A spark may cause an explosion of the

gases that surround the battery.

Jump Starting

1. Start the engine of the booster vehicle

and rev the engine moderately, or press

the accelerator gently to keep your

engine speed between 2000 and 3000

rpms, as shown in your tachometer.

2. Start the engine of the disabled vehicle.

3. Once the disabled vehicle has been

started, run both vehicle engines for an

additional three minutes before

disconnecting the jumper cables.

Removing the Jumper Cables

Remove the jumper cables in the reverse

order that they were connected.

4

1

3

2

E142665

1. Remove the jumper cable from the

ground metal surface or connecting

point, if available.

2. Remove the jumper cable on the

negative (-) terminal of the booster

vehicle's battery.

3. Remove the jumper cable from the

positive (+) terminal of the booster

vehicle's battery.

4. Remove the jumper cable from the

positive (+) terminal of the disabled

vehicle's battery.

After the disabled vehicle has been started

and the jumper cables removed, allow it

to idle for several minutes so the battery

can recharge.

215

Super Duty (), enUSA

Roadside Emergencies

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 469 470

Commentaires sur ces manuels

Pas de commentaire