Ford 2005 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 63)

Combination lap and shoulder belts

1. Insert the belt tongue into the

proper buckle (the buckle closest to

the direction the tongue is coming

from) until you hear a snap and feel

it latch. Make sure the tongue is

securely fastened in the buckle.

2. To unfasten, push the release

button and remove the tongue from

the buckle.

The front outboard safety restraints in the vehicle are combination lap

and shoulder belts. The front passenger outboard safety belt has two

types of locking modes described below:

Vehicle sensitive mode

This is the normal retractor mode, which allows free shoulder belt length

adjustment to your movements and locking in response to vehicle

movement. For example, if the driver brakes suddenly or turns a corner

sharply, or the vehicle receives an impact of approximately 5 mph (8

km/h) or more, the combination safety belts will lock to help reduce

forward movement of the driver and passengers.

Automatic locking mode

The automatic locking mode is not available on the driver safety belt.

In this mode, the shoulder belt is automatically pre-locked. The belt will

still retract to remove any slack in the shoulder belt. The automatic

locking mode is not available on the driver safety belt.

REVIEW COPY

2005 Ranger (ran), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Seating and Safety Restraints

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 255 256

Pas de commentaire

Ford 2005 Ranger v.1 Manuel d'utilisateur Page 63