Ford 2005 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 39)

HEADLAMP AIM ADJUSTMENT

The headlamps are designed to be mechanically aimed, but can also be

aimed visually by doing the following:

1. Park your vehicle on a level

surface about 25 feet (7.6 meters)

away from a vertical plain surface

(3). Check your headlamp alignment

at night or in a dark area so that

you can see the headlamp beam

pattern.

• (1) Eight feet

• (2) Center height of lamp to

ground

• (3) Twenty-five feet

• (4) Horizontal reference line

• (5) Center of headlamps

• (6) Center line of the vehicle

2. The center of the headlamp is marked either on the lens (a circle or

cross marker) or on the bulb shield, internal to the lamp (mark or

feature). Measure the height from the center of your headlamp to the

ground (2) and mark an 8 foot (2.4 meter) long horizontal line on the

wall or screen (1) at this height (masking tape works well).

3. Turn on the low beam headlamps

and open the hood.

4. Locate the high intensity area of

the beam pattern and place the top

edge of the intensity zone even with

the horizontal reference line (4). If

the top edge of the high intensity

area is not even with the horizontal

line, follow the next step to adjust

it.

REVIEW COPY

2005 Ranger (ran), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Lights

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 255 256

Pas de commentaire

Ford 2005 Ranger v.1 Manuel d'utilisateur Page 39