Ford 2005 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 229)

8. Remove the dipstick and inspect

the fluid level. Level should be in

the cross-hatched area.

9. If necessary, add fluid in 250ml (1/2 pint) increments through the filler

tube until the level is correct at normal operating temperatures. Refer to

the Lubricant specifications section in this chapter for the correct fluid

type. The use of any other non-approved fluid may cause internal

transmission damage.

10. Fluid can be checked at ambient

temperatures between 10–30°C

(50–95°F). DO NOT ADD fluid until

the transmission is at normal

operating temperatures or the transmission will be overfilled.

Low fluid level

Do not drive the vehicle if the fluid

level is at or below the bottom of

the dipstick.

High fluid level

Fluid levels above the safe range

may cause overheating, shift and/or

engagement concerns and internal

transmission damage. If an overfill

condition occurs, excess fluid should

be removed by a qualified technician.

REVIEW COPY

2005 Ranger (ran), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Maintenance and Specifications

229

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 255 256

Pas de commentaire

Ford 2005 Ranger v.1 Manuel d'utilisateur Page 229