Ford 2005 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 212)

• Do not add/mix an orange-colored, extended life coolant such

as Motorcraft Speciality Orange Engine Coolant, VC-2 (US) or

CXC-209 (Canada), meeting Ford specification WSS-M97B44–D

with the factory-filled coolant. Mixing Motorcraft Speciality Orange

Engine Coolant or any orange-colored extended life product with your

factory filled coolant can result in degraded corrosion protection.

• A large amount of water without engine coolant may be added, in case

of emergency, to reach a vehicle service location. In this instance, the

cooling system must be drained and refilled with a 50/50 mixture of

engine coolant and distilled water as soon as possible. Water alone

(without engine coolant) can cause engine damage from corrosion,

overheating or freezing.

• Do not use alcohol, methanol, brine or any engine coolants

mixed with alcohol or methanol antifreeze (coolant). Alcohol

and other liquids can cause engine damage from overheating or

freezing.

• Do not add extra inhibitors or additives to the coolant. These

can be harmful and compromise the corrosion protection of the engine

coolant.

For vehicles with overflow coolant systems with a non-pressurized cap

on the coolant recovery system, add coolant to the coolant recovery

reservoir when the engine is cool. Add the proper mixture of coolant and

water to the “FULL COLD” level. For all other vehicles, which have a

coolant degas system with a pressurized cap, or if it is necessary to

remove the coolant pressure relief cap on the radiator of a vehicle with

an overflow system, follow these steps to add engine coolant.

Note: The 3.0L and 4.0L V6 engines use the overflow system, and the

2.3L I4 engines use the degas system.

To reduce the risk of personal injury, make sure the engine is

cool before unscrewing the coolant pressure relief cap. The

cooling system is under pressure; steam and hot liquid can come out

forcefully when the cap is loosened slightly.

1. Before you begin, turn the engine off and let it cool.

2. When the engine is cool, wrap a thick cloth around the coolant

pressure relief cap on the coolant reservoir (a translucent plastic bottle).

Slowly turn cap counterclockwise (left) until pressure begins to release.

3. Step back while the pressure releases.

REVIEW COPY

2005 Ranger (ran), Owners Guide (post-2002-fmt) (own2002),

Market: USA_English (fus)

Maintenance and Specifications

212

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 255 256

Pas de commentaire

Ford 2005 Ranger v.1 Manuel d'utilisateur Page 212