Ford 2013 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 332)

100

101

7. Without disconnecting the sensor (4), pull the air filter assembly up to

disconnect the air filter assembly from the seated grommets located

underneath the air filter assembly.

8. Rotate the air filter assembly 90

degrees counterclockwise and

reinstall into the rubber hose.

9. Tighten the clamp (1).

10. The transmission fluid level indicator can now be accessed.

Low fluid level

If the fluid level is below the MIN

range of the dipstick, add fluid to

reach the hash mark level. Note: If

the fluid level is below the MIN level,

do not drive the vehicle. An underfill condition may cause shift and/or

engagement concerns and/or possible damage.

Correct fluid level

The transmission fluid should be checked at normal operating

temperature 180°F-200°F (82°C-93°C) on a level surface. The normal

operating temperature can be reached after approximately 20 miles

(30 km) of driving.

The transmission fluid level should be

targeted within the cross-hatch area

if at normal operating temperature

180°F-200°F (82°C-93°C).

MAX

MIN

332 Maintenance

2013 Explorer (exp)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 564 565

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Explorer v.2 Manuel d'utilisateur Page 332

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Explorer v.2