Ford 2013 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 98)

100

101

Note: Typical road dust, dirt and water spots will not affect the

automatic high beam system’s performance. However, in cold or

inclement weather conditions, the automatic high beam system’s

availability may be decreased. If the driver wants to change the beam

state independently of the system, the driver may turn the high beams

ON or OFF using the multifunction switch stalk. Automatic control will

resume when conditions are correct.

Note: Modification of the vehicle ride height (e.g. using much larger

tires) may degrade feature performance.

A camera sensor is centrally mounted behind the windshield of the

vehicle, and monitors the conditions to decide when to switch the high

beams off and on.

Once the system is active the high beams will switch on if:

• The ambient light level is low enough that high beams are needed.

• There is no traffic in front of the vehicle

• Vehicle speed must be greater than 25 mph (40 kph)..

• Severe weather is not detected.

The high beams will switch off if:

• An approaching vehicle’s headlights or a preceding vehicle’s tail lamps

are detected.

• The vehicle speed falls below 16 mph (25 kph).

•

The ambient light level is high enough that high beams are not needed.

• Severe rain, snow or fog is detected.

• The camera is blocked.

Activating the system

Switch the system on within the information display. See Information

displays.

Turn the lighting control to the

autolamps position.

98 Lighting

2013 Explorer (exp)

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 564 565

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Explorer v.2 Manuel d'utilisateur Page 98

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Explorer v.2