Ford 2012 F-150 Raptor v.3 Manuel d'utilisateur télécharger pdf (Page 85)

100

101

4. On the wall or screen you will

observe a light pattern with a

distinct horizontal edge towards the

right. If this edge is not at the

horizontal reference line, the beam will need to be adjusted so the edge

is at the same height as the horizontal reference line.

5. Locate the vertical adjuster on

each headlamp, then use a #2

Phillips screwdriver to turn the

adjuster either counterclockwise (to

adjust up) or clockwise (to adjust

down) aligning the upper edge of

the light pattern up to the

horizontal line.

6. HORIZONTAL AIM IS NOT

REQUIRED FOR THIS VEHICLE

AND IS NON-ADJUSTABLE.

7. Repeat Steps 3–5 for the other headlamp.

8. Close the hood and turn off the lamps.

TURN SIGNAL CONTROL

The turn signal lever does not mechanically lock in the upward or

downward position when activated. The turn signal control activation and

cancellation is electronic.

• To operate the left turn signal,

push the lever down until it stops

and release.

• To operate the right turn signal,

push the lever up until it stops

and release.

• To manually cancel turn signal operation, push the lever again in

either direction.

Lane change

To indicate a left or right lane change:

• Push the lever up/down to the first stop position and release. The turn

signals will flash three times and stop.

• Push the lever up/down to the first stop position and hold. The turn

signals will flash for as long as the lever is held in this position.

Lights

2012 F-150 (f12)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 471 472

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 F-150 Raptor v.3 Manuel d'utilisateur Page 85

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 F-150 Raptor v.3