Ford 2012 F-150 Raptor v.3 Manuel d'utilisateur Page 69

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 472
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 68
Do not put objects under the front seats that will interfere with the
airflow to the back seats.
Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
To improve the A/C cool down, drive with the windows slightly open
for not more than 2-3 minutes after start up to “air out” the vehicle.
For maximum cooling performance when using Max A/C or
(recirculated air), all windows and doors should remain closed.
A small amount of air may be felt from the floor vent regardless of the
air distribution setting that is selected.
If you are driving during extreme high ambient temperatures and idling
for extended periods of time in gear, it is recommended to run the A/C
in the MAX A/C position, adjust the blower fan speed to the lowest
setting and put the vehicle’s transmission into the P (Park) position to
continue to receive cool air from your A/C system.
For maximum cooling performance (MAX A/C):
Select MAX A/C.
(Panel) and (panel/floor) modes:
Move the temperature control to the coolest setting.
Select A/C and
(recirculated air). Use recirculated air with A/C to
provide colder airflow.
Set the fan to the highest speed initially, then adjust to maintain
comfort.
To aid in side window defogging/demisting in cold weather:
1. Select
(panel/floor).
2. Select A/C.
3. Adjust the temperature control to maintain comfort.
4. Set the fan speed to the highest setting.
5. Direct the outer instrument panel vents towards the side windows.
To increase airflow to the outer instrument panel vents, close the vents
located in the middle of the instrument panel.
Climate Controls
69
2012 F-150 (f12)
Owners Guide, 3rd Printing
USA (fus)
Vue de la page 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 471 472

Commentaires sur ces manuels

Pas de commentaire