Ford 2012 F-150 Raptor v.3 Manuel d'utilisateur télécharger pdf (Page 374)

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol or

Motorcraft威 Premium Windshield Washer Concentrate (ZC-32-A) in

the U.S., or Premium Quality Windshield Washer Fluid [CXC-37-(A, B,

D, or F)] in Canada, available from your authorized dealer. This

washer fluid contains special solution in addition to alcohol which

helps to remove the hot wax deposited on the wiper blade and

windshield from automated car wash facilities. Be sure to replace

wiper blades when they appear worn or do not function properly.

• Do not use abrasives, as they may cause scratches.

• Do not use fuel, kerosene, or paint thinner to clean any parts.

If you cannot remove those streaks after cleaning with the glass cleaner

or if the wipers chatter and move in a jerky motion, clean the outer

surface of the windshield and the wiper blades using a sponge or soft

cloth with a neutral detergent or mild-abrasive cleaning solution. After

cleaning, rinse the windshield and wiper blades with clean water. The

windshield is clean if beads do not form when you rinse the windshield

with water.

Do not use sharp objects, such as a razor blade, to clean the inside

of the rear window or to remove decals, as it may cause damage to

the rear window defroster’s heated grid lines (if equipped).

INSTRUMENT PANEL, DOOR PANELS AND CONSOLE

(HARLEY-DAVIDSON AND FX APPEARANCE PACKAGE)

Your vehicle’s instrument panel, door panels and console are uniquely

painted with both high and low gloss paints that require special care.

The high gloss area is similar to that of the vehicle’s exterior; the low

gloss area is designed to help protect the driver from undesirable

windshield reflection.

High gloss paint area

In order to maintain the finish, the high gloss areas should be treated

similar to the that of exterior paint or glossy plastic surfaces. When

cleaning the high gloss areas:

• Do not use paper towels or newspaper.

• Do not use silicone or Teflon威 (PTFE)-based products.

Dust the high gloss areas with a clean, dry cloth, or use Motorcraft

Dusting Cloth (ZC-24).

For general cleaning, use mild, soapy water and a soft, damp cloth, then

dry with a clean, dry cloth.

Cleaning

374

2012 F-150 (f12)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 369 370 371 372 373 374 375 376 377 378 379 ... 471 472

Ford 2012 F-150 Raptor v.3 Manuel d'utilisateur Page 374