Ford 2012 F-150 Raptor v.3 Manuel d'utilisateur télécharger pdf (Page 23)

100

101

OIL LIFE

This displays the remaining oil life.

An oil change is required whenever indicated by the message center and

according to the recommended maintenance schedule. USE ONLY

RECOMMENDED ENGINE OILS.

To reset the oil monitoring system to 100% after each oil change,

perform the following:

1. Press and release the SETUP button to display “OIL LIFE XXX%

HOLD RESET = NEW”.

2. Press and hold the RESET button for two seconds and release to reset

the oil life to 100%.

Note: To change oil life 100% value (if equipped with this feature) to

another value, proceed to Step 3.

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the

RESET button to change the Oil Life Start Value. Each release and press

will reduce the value by 10%.

UNITS

Displays the current units in English or Metric.

Press the RESET button to change from English to Metric.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the

ignition is switched off.

Press the RESET button to select the new autolamp delay values of 0,

10, 20, 30, 60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is

shifted into any gear, putting the vehicle in motion.

Press the RESET button to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s

door is opened within 10 minutes of the ignition being turned off.

Press the RESET button to turn autounlock on or off.

Instrument Cluster

2012 F-150 (f12)

Owners Guide, 3rd Printing

USA (fus)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 471 472

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 F-150 Raptor v.3 Manuel d'utilisateur Page 23

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 F-150 Raptor v.3