Ford 2010 Transit Connect v.2 Manuel d'utilisateur télécharger pdf (Page 68)

Programming spare keys

You can program your own coded keys to your vehicle. Please read and

understand the entire procedure before you begin.

The process for programming Securilock威 keys is independent of the

process for programming Remote Entry Transmitters. If your vehicle is

fitted with Securilock威 and Remote Entry, you must perform both

learning procedures in order to program both the Immobilizer and

Remote Locking functions of the key fob.

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use SecuriLock威 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

1. Insert a previously programmed

coded key into the ignition.

2. Turn the ignition from the O (off)

position to the II (on) position.

Keep the ignition in the II (on)

position for at least one second, but

no more than 10 seconds.

3. Turn the ignition to the O (off)

position.

4. Remove the previously programmed coded key from the ignition.

5. After three seconds but within 10 seconds of removing the previously

programmed coded key, insert the other previously programmed coded

key into the ignition.

6. Turn the ignition from the O (off) position to the II (on) position.

Keep the ignition in the II (on) position for at least one second but not

more than 10 seconds.

7. Turn the ignition to the O (off) position.

8. Remove the previously programmed coded key from the ignition.

Locks and Security

2010 Transit Connect (tst)

Owners Guide (own2002), 2nd Printing

USA (fus)

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 258 259

Pas de commentaire

Ford 2010 Transit Connect v.2 Manuel d'utilisateur Page 68