Ford 2010 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 266)

DRIVELINE UNIVERSAL JOINT AND SLIP YOKE

Your vehicle is equipped with universal joints that do not require

lubrication. If the original universal joints are replaced with universal

joints equipped with grease fittings, periodic lubrication will be

necessary.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft威 part numbers in this chapter.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

1. Loosen the clamp that secures the air inlet tube to the engine air filter

cover and disconnect the tube from the cover (for V6 only).

2. Release the clamps that secure the air filter housing cover.

3. Carefully separate the two halves

of the air filter housing.

4. Remove the air filter element from the air filter housing.

5. Wipe the air filter housing and cover clean to remove any dirt or

debris and to ensure good sealing.

Maintenance and Specifications

266

2010 Ranger (ran)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 285 286

Pas de commentaire

Ford 2010 Ranger v.1 Manuel d'utilisateur Page 266