Ford 2010 Explorer Sport Trac Manuel d'utilisateur télécharger pdf (Page 33)

TRAILER SWAY

This feature uses the electronic stability control to mitigate trailer sway,

Press the RESET button to turn trailer sway on or off.

COMPASS (if equipped)

The compass heading is displayed as one of N, NE, E, SE, S, SW, W and

NW in the message center display.

The compass reading may be affected when you drive near large

buildings, bridges, power lines and powerful broadcast antenna. Magnetic

or metallic objects placed in, on or near the vehicle may also affect

compass accuracy.

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to RESET FOR ZONE SETTING /

PRESS RESET FOR CALIBRATION following.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Refer to RESET FOR ZONE SETTING / PRESS RESET FOR

CALIBRATION following.

RESET FOR ZONE SETTING

1. Determine your magnetic zone by

referring to the zone map.

2. Start the engine.

3. Press the SETUP button to select

RESET FOR ZONE SETTING.

4. Press the RESET button until the

message center display changes to

show the current zone setting (XX).

5. Press the RESET button

repeatedly until the correct zone

setting for your geographic location is displayed on the message center.

The range of zone values are from 01 to 15 and “wraps” back to 01.

6. Wait four seconds when correct zone is chosen.

123

6 7 8 9 1011

Instrument Cluster

2010 07+ Explorer Sport Trac (esp)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 343 344

Pas de commentaire

Ford 2010 Explorer Sport Trac Manuel d'utilisateur Page 33