Ford 2010 Explorer Sport Trac Manuel d'utilisateur télécharger pdf (Page 120)

Replacement keys

If your keys are lost or stolen and you don’t have an extra coded key,

you will need to have your vehicle towed to an authorized dealer. The

key codes need to be erased from your vehicle and new coded keys will

need to be programmed.

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

You can program your own coded keys to your vehicle.

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use SecuriLock威 keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

Please read and understand the entire procedure before you begin.

1. Insert the first previously programmed coded key into the ignition.

2. Turn the ignition from the 1 (off)

position to the 3 (on) position. Keep

the ignition in the 3 (on) position

for at least three seconds, but no

more than 10 seconds.

3. Turn the ignition to the 1 (off)

position and remove the first coded

key from the ignition.

4. After three seconds but within

ten seconds of turning the ignition

to the 1 (off) position, insert the second previously coded key into the

ignition.

5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least three seconds, but no more

than 10 seconds.

Locks and Security

120

2010 07+ Explorer Sport Trac (esp)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 343 344

Pas de commentaire

Ford 2010 Explorer Sport Trac Manuel d'utilisateur Page 120