Ford 2010 Expedition v.1 Manuel d'utilisateur télécharger pdf (Page 124)

100

101

4. Rotate the bulb socket counterclockwise and remove from lamp

assembly.

5. Pull bulb straight out of socket and snap in the new bulb.

6. Install the bulb socket into the lamp assembly and rotate clockwise.

7. Carefully install the tail lamp assembly on the vehicle by securing the

lamp assembly with two torx screws.

Replacing the high-mount brakelamp

To change the high-mount

brakelamp bulbs:

1. Remove the two screws holding

the lamp assembly in place.

2. Pull the lamp assembly straight

out.

3. Disconnect the wire harness.

4. Press the four tabs that hold the

light assembly on, one at a time, and

pull the black bulb carrier away

from the lamp.

5. Pull the old bulb out and replace

with the new bulb.

6. Snap the black bulb carrier into

the lamp assembly.

7. Connect the wire harness.

8. Install the lamp assembly with

two screws.

Replacing fog lamp bulbs

1. From underneath the vehicle,

rotate the harness/bulb assembly

counterclockwise, to remove from

the fog lamp assembly.

2. Carefully disconnect the bulb

from the harness assembly via the

two snap clips.

Install the new bulb in reverse

order.

Lights

124

2010 Expedition (exd)

Owners Guide (own2002), 1st Printing

USA (fus)

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 419 420

Commentaires sur ces manuels

Pas de commentaire

Ford 2010 Expedition v.1 Manuel d'utilisateur Page 124

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2010 Expedition v.1