Ford 2009 Edge v.2 Manuel d'utilisateur télécharger pdf (Page 120)

Programming spare keys

You can program your own Integrated Keyhead Transmitters or standard

SecuriLock™ coded keys to your vehicle. This procedure will program

both the engine immobilizer keycode and the remote entry transmitter

portion of the IKT to your vehicle. Note: A maximum of eight coded

keys can be programmed to your vehicle; only four of these eight can be

IKTs with remote entry functionality.

Tips:

• Only use Integrated Keyhead Transmitters (IKTs) or standard

SecuriLock™ keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

Please read and understand the

entire procedure before you begin.

1. Insert the first previously

programmed coded key into the

ignition.

2. Turn the ignition from the 1 (off)

position to the 3 (on) position. Keep

the ignition in the 3 (on) position

for at least three seconds, but no more than 10 seconds.

3. Turn the ignition to the 1 (off) position and remove the first coded

key from the ignition.

4. After three seconds but within 10 seconds of turning the ignition to

the 1 (off) position, insert the second previously coded key into the

ignition.

5. Turn the ignition from the 1 (off) position to the 3 (on) position. Keep

the ignition in the 3 (on) position for at least three seconds, but no more

than 10 seconds.

2009 Edge (edg)

Owners Guide, 2nd Printing

USA (fus)

Locks and Security

120

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 325 326

Pas de commentaire

Ford 2009 Edge v.2 Manuel d'utilisateur Page 120