Ford 2008 Focus v.2 Manuel d'utilisateur télécharger pdf (Page 72)

Replacing coded keys can be very costly. Store an extra programmed key

away from the vehicle in a safe place to help prevent any

inconveniences. Please visit an authorized dealer to purchase additional

spare or replacement keys.

Programming spare keys

You can program your own coded keys to your vehicle. Please read and

understand the entire procedure before you begin.

Tips:

• A maximum of eight keys can be coded to your vehicle.

• Only use SecuriLock™ keys.

• You must have two previously programmed coded keys (keys that

already operate your vehicle’s engine) and the new unprogrammed

key(s) readily accessible.

• If two previously programmed coded keys are not available, you must

take your vehicle to your authorized dealer to have the spare key(s)

programmed.

1. Insert a previously programmed

coded key into the ignition.

2. Turn the ignition from the 1

(OFF) position to the 3 (ON)

position. Keep the ignition in the 3

(ON) position for at least one

second, but no more than 10

seconds.

3. Turn the ignition to the 1 (OFF) position.

4. Remove the previously programmed coded key from the ignition.

5. Within ten seconds of removing the previously programmed coded key,

insert the other previously programmed coded key into the ignition.

6. Turn the ignition from the 1 (OFF) position to the 3 (ON) position.

Keep the ignition in the 3 (ON) position for at least one second but not

more than 10 seconds.

7. Turn the ignition to the 1 (OFF) position.

8. Remove the previously programmed coded key from the ignition.

9. Within twenty seconds of removing the previously programmed coded

key, insert the unprogrammed key (new/valet key) into the ignition.

10. Turn the ignition from the 1 (OFF) position to the 3 (ON) position.

Keep the ignition in the 3 (ON) position for at least one second, but no

more than 10 seconds.

2008 Focus (foc)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 263 264

Pas de commentaire

Ford 2008 Focus v.2 Manuel d'utilisateur Page 72