Ford 2008 Focus v.1 Manuel d'utilisateur télécharger pdf (Page 156)

Using ABS

When hard braking is required, apply continuous force on the brake

pedal; do not pump the brake pedal since this will reduce the

effectiveness of the ABS and will increase your vehicle’s stopping

distance. The ABS will be activated immediately, allowing you to retain

steering control during hard braking and on slippery surfaces. However,

the ABS does not decrease stopping distance.

ABS warning lamp

The ABS lamp in the instrument

cluster momentarily illuminates

when the ignition is turned on. If

the light does not illuminate during

start up, remains on or flashes, the

ABS may be disabled and may need to be serviced

Even when the ABS is disabled,

normal braking is still effective. (If

your BRAKE warning lamp

illuminates with the parking brake

released, have your brake system

serviced immediately.)

Parking brake

To set the parking brake (1), pull

the parking brake handle up as far

as possible.

The BRAKE warning lamp will

illuminate and will remain

illuminated until the parking brake

is released.

To release, press and hold the button (2), pull the handle up slightly,

then push the handle down.

ABS

BRAKE

2008 Focus (foc)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

156

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 255 256

Pas de commentaire

Ford 2008 Focus v.1 Manuel d'utilisateur Page 156