Ford 2007 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 260)

WINDSHIELD WASHER FLUID

Add fluid to fill the reservoir if the

level is low. In very cold weather, do

not fill the reservoir completely.

Only use a washer fluid that meets

Ford specification WSB-M8B16–A2.

Do not use any special washer fluid

such as windshield water

repellant-type fluid or bug wash as

this may cause a

squeaking/chattering noise, streaking

or smearing. Refer to Maintenance

Product Specifications and Capacities in this chapter.

State or local regulations on volatile organic compounds may restrict the

use of methanol, a common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze agents should be used

only if they provide cold weather protection without damaging the

vehicle’s paint finish, wiper blades or washer system.

If you operate your vehicle in temperatures below 40°F (4°C),

use washer fluid with antifreeze protection. Failure to use

washer fluid with antifreeze protection in cold weather could result in

impaired windshield vision and increase the risk of injury or accident.

Note: Do not put washer fluid in the engine coolant reservoir. Washer

fluid placed in the cooling system may harm engine and cooling system

components.

CHANGING THE WIPER BLADES

1. Pull the wiper arm away from the

vehicle. Turn the blade at an angle

from the wiper arm. Push the lock

pin manually to release the blade

and pull the wiper blade down

toward the windshield to remove it

from the arm.

2. Attach the new wiper to the

wiper arm and press it into place

until a click is heard.

3. Replace wiper blades at least once per year for optimum performance.

2007 F-250/350/450/550 (f23)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

260

1 2 ... 255 256 257 258 259 260 261 262 263 264 265 ... 311 312

Pas de commentaire

Ford 2007 F-550 v.2 Manuel d'utilisateur Page 260