Ford 2007 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 195)

Shifting from 2WD (2WD High) to 4x4 HIGH (4WD High)

Rotate the 4WD control to the

4x4 HIGH position at speeds up to

55 mph (88 km/h).

• The electronic shift 4WD

system is designed to engage

4x4 HIGH (4WD High) when

the vehicle is moving. If

shifted to 4x4 HIGH (4WD

HIGH) while at complete stop,

4x4 may not engage and the

4x4 indicator may not

illuminate until the vehicle is allowed to move at a speed above

1 mph (1.6 km/h).

• Do not shift into 4x4 HIGH with the rear wheels slipping.

Shifting from 4x4 HIGH (4WD High) to 2WD (2WD High)

Rotate the 4WD control to 2WD at

any forward speed. Disengagement

of the transfer case and front hubs

may be delayed due to torque bind

which is caused by driving on dry

hard surfaces or performing tight

turns while using the 4WD system.

• You do not need to operate the vehicle in R (Reverse) to disengage

your front hubs, but it will eliminate any torque bind and allow the

system to immediately disengage.

Shifting from 4x4 HIGH (4WD High) to 4x4 LOW (4WD Low)

1. Bring the vehicle to a complete stop.

2. Depress the brake.

3. Place the gearshift in N (Neutral).

2007 F-250/350/450/550 (f23)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

195

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 311 312

Pas de commentaire

Ford 2007 F-550 v.2 Manuel d'utilisateur Page 195