Ford 2007 Edge v.2 Manuel d'utilisateur télécharger pdf (Page 82)

100

101

Replacing tail/stop/turn/sidemarker/backup lamp bulbs

The tail/stop/turn/sidemarker/backup lamp bulbs are located in the same

portion of the tail lamp assembly, one just below the other. Follow the

same steps to replace either bulb:

1. Make sure the headlamp switch is

in the OFF position and then open

the liftgate to expose the lamp

assembly bolts.

2. Remove the two bolts from the

lamp assembly.

3. Carefully remove the lamp

assembly away from the vehicle by

pulling the assembly straight out to

expose the bulb socket. DO NOT

TIP THE LAMP ASSEMBLY SIDEWAYS.

4. Rotate the bulb socket counterclockwise and remove from lamp

assembly.

5. Pull bulb straight out of socket and snap in the new bulb.

6. Install the bulb socket into the lamp assembly and rotate clockwise.

7. Carefully install the tail lamp assembly on the vehicle by securing the

lamp assembly with two bolts.

Replacing high-mount brake lamp bulbs

1. Remove the two screws and move

the lamp assembly away from the

liftgate.

2007 Edge (edg)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 319 320

Commentaires sur ces manuels

Pas de commentaire

Ford 2007 Edge v.2 Manuel d'utilisateur Page 82

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2007 Edge v.2